Mirage775's '88 LX 5.0 Coupe Build Thread
#21
#22
Well That's One Less thing To Deal With. Likely Will Need a Good Flush & Vacuum Test Before Refilling! A New Accumulator Will Be a Must As Well! Looking At that Exposed O-Ring it Looks Like it Was A Bit Off Center When Installed. Could Also Be Wrong Size O-Ring. Man Those Are a Pain!
KC
KC
Last edited by 05stangkc; 12/5/23 at 02:29 PM.
#23
Well That's One Less thing To Deal With. Likely Will Need a Good Flush & Vacuum Test Before Refilling! A New Accumulator Will Be a Must As Well! Looking At that Exposed O-Ring it Looks Like it Was A Bit Off Center When Installed. Could Also Be Wrong Size O-Ring. Man Those Are a Pain!
KC
KC
#25
My cousin came by tonight to pick up some Johnny Lighting "Kings of the 1/4 mile" cars I found him and he wanted to see the Mustang. Side note, he's a professional photographer for Gasser Magazine:
Anyway, he's been into drag racing since he was a kid, he's in his mid 50s now. But we were talking about some of the ****ty wiring on my car and we discovered what this mess is/was:
They half assed wired a toggle switch under the dash to this relay and fuse (poorly) to the crappy electric fan... So, I should be able to remove all this junk and toss it and properly wire in an electric fan(s)! One less problem solved!
Anyway, he's been into drag racing since he was a kid, he's in his mid 50s now. But we were talking about some of the ****ty wiring on my car and we discovered what this mess is/was:
They half assed wired a toggle switch under the dash to this relay and fuse (poorly) to the crappy electric fan... So, I should be able to remove all this junk and toss it and properly wire in an electric fan(s)! One less problem solved!
Thread
Thread Starter
Forum
Replies
Last Post