What did you do with your Mustang today?
Roush Forum Stalker
2013 RR Boss 302 #2342
Join Date: March 6, 2012
Location: Lancaster, PA
Posts: 11,753
Likes: 0
Received 2,271 Likes
on
1,693 Posts
Originally Posted by shaneyusa
Well it was $20.69 and tax if I could have picked it up. Tried locally and they wanted a nearly $40+tax. That is way over list. So I ordered it from my favorite Ford Dealer in Minnesota, AutoNation Ford White Bear Lake. Lowest I could find. I have always got great prices from them. Catch is that it cost me $7.95 shipping and $1.99 for handling & materials. So it was $30.63. Still ahead compared to local.
V6 Member
I didn't do this "today" but This weekend I installed a set of LED headlights. Wow, What a difference! I didn't have any major complaints about the stock halogen lamps but now I can see so much better when driving at night. I also installed (tried to install) a couple of LED license plate bulbs but they keep blowing my tail light fuse. I returned them and ordered a different set, will try them later.
Completely agree about the LED headlights, I've used them in 3 different vehicles recently and all have worked flawlessly while giving a huge output upgrade.
I did some fast and easy weight reduction today. Took off the STB and engine cover for about 11 lbs, and then pulled the trunk floor board, and mat out for about 14 lbs. Not too bad for 5 min work, all of it unbolting the STB. I dont have a spare, just an air compressor I really want to weigh my car, there just isnt a weigh station very close. It's a base package brembo car that's already had a good deal of drivetrain and suspension mods.
I did some fast and easy weight reduction today. Took off the STB and engine cover for about 11 lbs, and then pulled the trunk floor board, and mat out for about 14 lbs. Not too bad for 5 min work, all of it unbolting the STB. I dont have a spare, just an air compressor I really want to weigh my car, there just isnt a weigh station very close. It's a base package brembo car that's already had a good deal of drivetrain and suspension mods.
Bullitt Member
Join Date: September 24, 2016
Location: Maine, or eastern Canada
Posts: 365
Received 53 Likes
on
47 Posts
Mishimoto polished aluminum coolant expansion tank. Infinitely prettier than Ford's nasty plastic bubble. Easy install, works great.
I did some fast and easy weight reduction today. Took off the STB and engine cover for about 11 lbs, and then pulled the trunk floor board, and mat out for about 14 lbs. Not too bad for 5 min work, all of it unbolting the STB. I dont have a spare, just an air compressor I really want to weigh my car, there just isnt a weigh station very close. It's a base package brembo car that's already had a good deal of drivetrain and suspension mods.
Weighed her today, with me not in the car, and about a 1/2 tank as shown
Roush Forum Stalker
The following users liked this post:
Sarge (10/15/17)
Bullitt Member
Join Date: September 24, 2016
Location: Maine, or eastern Canada
Posts: 365
Received 53 Likes
on
47 Posts
I have the CAI and the tuner from Cobb. I might get an intercooler from them eventually, but that's not a priority right now.
Roush Forum Stalker
Bullitt Member
Join Date: September 24, 2016
Location: Maine, or eastern Canada
Posts: 365
Received 53 Likes
on
47 Posts
Definitely got a good bump from the tuner. Seat dyno says more torque off the line when I'm in performance mode, and about 3 mpg better mileage in economy mode. I didn't notice much from the intake, but since I put it in I can hear the BOV hissing like big truck air brakes when I shift, and the turbo breathing sounds louder too; it's almost an audible boost gauge. I like that.
Today I put brushed stainless side skirt covers on. Yeah, more shininess.
Today I put brushed stainless side skirt covers on. Yeah, more shininess.
GTR Member
I run these on both of my fords. 99 & 10. plan to replace my wifes 14 rav4 factory battery with motorcraft when it dies too
Tasca Super Boss 429 Member
Well, in the last two weeks I, not necessarily always in this order:
1. Traded the EB for a Grabber Blue GT
2. Installed Stanginator
3. Installed Bumper Plugs
4. Installed rear sidemark LEDs
5. Ordered K Brace/Strut Tower Brace (arrived today)
6. Replaced all Interior and Trunk lights with LED
7. Added TL Sequencer
8. 4th Brake Light
9. Reinstalled my shift ****
10. Received, yet to install signaled hood heat extractors (in black)
Next will be (likely in this order):
Diode Dynamics Front LED Signal Housings (when available)
Steeda Ultra Light Jacking rails
Ford Performance Street Handling Pack
Ford Performance PP2 $1000
Performance Pack Gauges retrofit OR Hyrdodip the aluminum dash trim
1. Traded the EB for a Grabber Blue GT
2. Installed Stanginator
3. Installed Bumper Plugs
4. Installed rear sidemark LEDs
5. Ordered K Brace/Strut Tower Brace (arrived today)
6. Replaced all Interior and Trunk lights with LED
7. Added TL Sequencer
8. 4th Brake Light
9. Reinstalled my shift ****
10. Received, yet to install signaled hood heat extractors (in black)
Next will be (likely in this order):
Diode Dynamics Front LED Signal Housings (when available)
Steeda Ultra Light Jacking rails
Ford Performance Street Handling Pack
Ford Performance PP2 $1000
Performance Pack Gauges retrofit OR Hyrdodip the aluminum dash trim
The following users liked this post:
Evil_Capri (10/26/17)
GTR Member
Well, in the last two weeks I, not necessarily always in this order:
1. Traded the EB for a Grabber Blue GT
2. Installed Stanginator
3. Installed Bumper Plugs
4. Installed rear sidemark LEDs
5. Ordered K Brace/Strut Tower Brace (arrived today)
6. Replaced all Interior and Trunk lights with LED
7. Added TL Sequencer
8. 4th Brake Light
9. Reinstalled my shift ****
10. Received, yet to install signaled hood heat extractors (in black)
Next will be (likely in this order):
Diode Dynamics Front LED Signal Housings (when available)
Steeda Ultra Light Jacking rails
Ford Performance Street Handling Pack
Ford Performance PP2 $1000
Performance Pack Gauges retrofit OR Hyrdodip the aluminum dash trim
1. Traded the EB for a Grabber Blue GT
2. Installed Stanginator
3. Installed Bumper Plugs
4. Installed rear sidemark LEDs
5. Ordered K Brace/Strut Tower Brace (arrived today)
6. Replaced all Interior and Trunk lights with LED
7. Added TL Sequencer
8. 4th Brake Light
9. Reinstalled my shift ****
10. Received, yet to install signaled hood heat extractors (in black)
Next will be (likely in this order):
Diode Dynamics Front LED Signal Housings (when available)
Steeda Ultra Light Jacking rails
Ford Performance Street Handling Pack
Ford Performance PP2 $1000
Performance Pack Gauges retrofit OR Hyrdodip the aluminum dash trim
wheres pics of the GB??
GB is such a good color
I just got this in the mail today for a steal of a deal
Yesterday I crawled under the rear end and adjusted my exhaust tips cause they were canted inward. Then I shinned her up a little bit
I just got this in the mail today for a steal of a deal
Yesterday I crawled under the rear end and adjusted my exhaust tips cause they were canted inward. Then I shinned her up a little bit
The following users liked this post:
JeffreyDJ (10/19/17)
The following users liked this post:
JeffreyDJ (10/19/17)
GTR Member
I love GB and silver
Tasca Super Boss 429 Member
Today I picked her up from the Service Department. She was in for a CEL that came on at 1100 miles. On Wednesday the service advisor was able to see the CEL. However, by the time it was looked at Thursday afternoon the CEL was off with a P1000 code (usually battery cable disconnected). However, the car hasn't had the battery off.
So, I'll just keep an eye on it myself and scan the code myself if it comes back.
So, I'll just keep an eye on it myself and scan the code myself if it comes back.
Legacy TMS Member
Drove mine yesterday for the first time in over 2 weeks. Put about 140 miles on it with the wife by my side. We took a trip north to check out some foliage.
My GPS speed app on my phone had a max-speed on it of 103 before the trip.
Set a new max
My GPS speed app on my phone had a max-speed on it of 103 before the trip.
Set a new max