Got ticket for no front plate, need part number!!
Got ticket for no front plate, need part number!!
I parked my car on the street in Manhattan and lo and behold by the time I got back there was a ticket on the windshield. I thought that was odd because I fed the meter... Well, it's a $65 ticket for having no front plate, no other crime committed!
I loathe front plates but I guess I should be lucky for getting away with it for so long. How could anyone ruin this gorgeous front end with an ugly *** yellow license plate! (I'm in New York state.)
In any case, I decided to stop being a rebel and just mount the **** plate. However, because I purchased my car in a no-front-plate state, there is no mounting frame. I see two tiny hold drilled on the front bumper but that's all.
Can anyone help me out with the proper part number?
It's a 2012 V6 with pony package...
I loathe front plates but I guess I should be lucky for getting away with it for so long. How could anyone ruin this gorgeous front end with an ugly *** yellow license plate! (I'm in New York state.)
In any case, I decided to stop being a rebel and just mount the **** plate. However, because I purchased my car in a no-front-plate state, there is no mounting frame. I see two tiny hold drilled on the front bumper but that's all.
Can anyone help me out with the proper part number?
It's a 2012 V6 with pony package...
I don't know if it would work in your 2012 lower grill, but here is how I solved the problem without having that ugly thing on the bumper. The entire state name and plate number are visible, so I will never get any flack. The upper and lower edges are double folded and the plate is held on with bolts and nuts, so it isn't going anywhere.


With a firm tightening of the wingnuts, and placement of the rubber damping point on the bumper, there is no rattle or vibration, at least up to highway speeds up to 85-90 mph.
cheap option manual from AM
http://www.americanmuscle.com/flipdo...te-manual.html
only concern is if you have roush splitters, it wont work.
http://www.americanmuscle.com/flipdo...te-manual.html
only concern is if you have roush splitters, it wont work.
cheap option manual from AM
http://www.americanmuscle.com/flipdo...te-manual.html
only concern is if you have roush splitters, it wont work.
http://www.americanmuscle.com/flipdo...te-manual.html
only concern is if you have roush splitters, it wont work.
^ u r right.. i had to get few extra modifications to get that to work... there is a disclaimer in the product page.. just wanted to share before any one decide to buy that product.
Note: Not compatible with the CS/Boss Front Fascia with Splitter or Roush Body Kit.
Note: Not compatible with the CS/Boss Front Fascia with Splitter or Roush Body Kit.
Before you do anything research the law. If it simply says there needs to be a forward facing plate like it does here in Minnesota, get some temporay clips and attach it to the passenger side sun visor. Put the visor down when driving or parked on public roadways and you have a forward facing plate. The alternative is toss the plate on the dash while you're driving. It may not technically be what MN statue intended but it's how it reads and is defensable.
John
John
In Texas, they've had the front plate requirement for years- but until recently there was no fine attached (due to a loophole). The loophole was closed this year, and now its a $200 fine.
That said, I have the front plate and mount in my trunk and haven't had a problem yet (knock on wood). The law in Texas says it has to be mounted to the "front-most surface of the car" (i.e., you can't put it on the dash or visor).
I'm going to order the manual lever (however, I plan to install the Roush spoiler, so I'll probably wait till that's installed and then figure out how to make it work.
That said, I have the front plate and mount in my trunk and haven't had a problem yet (knock on wood). The law in Texas says it has to be mounted to the "front-most surface of the car" (i.e., you can't put it on the dash or visor).
I'm going to order the manual lever (however, I plan to install the Roush spoiler, so I'll probably wait till that's installed and then figure out how to make it work.






