lower grill opening
#61
Mach 1 Member
Join Date: September 8, 2009
Location: Brandon Florida
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Blazn is right. But then again, on the newest rendition of the Stang, we don't really have fog lights.. we have driving lights that turn off when we turn on our high beams. They're pretty ineffective as fog lights as in the fog don't light up the lines on the road or the road edges as they could if they were set lower in the bumper.
However, I still want it like the '69 cause that grille is better than the stock one right now.
However, I still want it like the '69 cause that grille is better than the stock one right now.
#62
Bullitt Member
Thread Starter
Bringing up a post from the dead! I have had a couple of guys ask if I was going to make any more of these grilles. Well I started a couple of months ago and I have finally gotten the grilles all welded up. Just need to grind the welds and send them to the powdercoater. Should be ready to ship in 3 to 4 weeks, I hope! I made 16 in this batch and there are quite a few that are not spoken for. If you think you might want one, you might want to get one as I am not sure if I will be making more. Price is still $175 shipped and for those that are not familiar with the grille, you might want to read the entire thread. Send me an IM or email if you are interested or have a question. Thanks, Mike
#64
Bullitt Member
Thread Starter
The grilles are back from powder coating and ready to ship. I sent out PM's to all who wanted one. I still have some left over that are not spoken for so if you need one let me know.
#66
Bullitt Member
Thread Starter
#68
Bullitt Member
Thread Starter
I sold out all the grilles from the this last batch. I currently have two guys interested in getting a grille, but I would like to get at least five people or more that definantly want one and I would make another batch. So if anyone wants one of these grilles, let me know. Thanks, Mike
#70
Bullitt Member
Thread Starter
Just an update... I have 12 frames bent, welded and ground, ready for the mesh to be welded on. I am hoping to have them finished and to the powder coater by the end of the month. I might have a couple extra available.
#73
Bullitt Member
Thread Starter
I have a couple of grilles that are available for sale. I had a few people never get back to me on whether they wanted them or not so I will offer them up for sale. Not sure if I will make another batch, but if I do I am thinking I might make it compatible with Blowfish Racings tow hook setup. I guess it depends on how many people are interested.
#74
I have a couple of grilles that are available for sale. I had a few people never get back to me on whether they wanted them or not so I will offer them up for sale. Not sure if I will make another batch, but if I do I am thinking I might make it compatible with Blowfish Racings tow hook setup. I guess it depends on how many people are interested.
#75
A nice piece. Easy install.
Took longer to get tools together than to do the install. About 2 minutes. Comes with the Dorman push rivets.
Great protection for the cooling system.
Took longer to get tools together than to do the install. About 2 minutes. Comes with the Dorman push rivets.
Great protection for the cooling system.
#76
Bullitt Member
Thread Starter
Just an update for those that expressed interest in grilles. The latest batch heads to the powder coater on Tuesday. Once the grilles are back from the coater (hopefully in a week or two) I will notify those who want them that are on my list.
#77
Bullitt Member
Thread Starter
Grilles come back from the coater tomorrow. It looks like I am going to have 1 grille available from this latest batch. This is a regular grille, not one with a towhook cutout. Send me a PM if interested. Thanks, Mike
Thread
Thread Starter
Forum
Replies
Last Post