2010 Steeda Q550 Streetfighter Edition
#41
Not the best picture, but I have attached a picture off our Q350, I thought the red/black contrast would make it stand out more.
#43
Bullitt Member
Ok, I was wrong on this one.... here is the scoop.
Those were Cobra Misano seats with additional work done to them on top of how they come out of the box. We had the Cobra name removed and recovered some of the leather. Plus we had to do something that had to do with the removal of the side airbags. This was for show purposes only, as it would be too pricey to do on normal production, although if someone wanted it, we could do it for them.
As done for the show car you are looking at about 4,600 for that set up.
Those were Cobra Misano seats with additional work done to them on top of how they come out of the box. We had the Cobra name removed and recovered some of the leather. Plus we had to do something that had to do with the removal of the side airbags. This was for show purposes only, as it would be too pricey to do on normal production, although if someone wanted it, we could do it for them.
As done for the show car you are looking at about 4,600 for that set up.
Thanks for the help.
#46
Could you please explain "Plus we had to do something that had to do with the removal of the side airbags" for those of us that would like to install aftermarket seats. I take it that the electrical connector can't just be left unplugged? Also, did anything have to be done with the weight sensor in the passenger seat for the passenger front airbag?
Thanks for the help.
Thanks for the help.
#47
Cobra R Member
Join Date: August 9, 2007
Location: Philadelphia
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
#48
MOTM Committee Member
Its not the GT500 piece. We have been working on this with a well known company. They will put their name on it when they are ready but I dont think they would want me saying who they are just yet. So I'll have to just leave it at that.
Not the best picture, but I have attached a picture off our Q350, I thought the red/black contrast would make it stand out more.
Not the best picture, but I have attached a picture off our Q350, I thought the red/black contrast would make it stand out more.
#50
Swamp Donkey Aficionado
Join Date: November 23, 2006
Posts: 1,863
Likes: 0
Received 0 Likes
on
0 Posts
#51
MOTM Committee Member
#52
Bullitt Member
I guess the question should be, does the Steeda diffuser actually affect the aero? I don't think the GT500 diffuser does, that it's just for show.
Gus, will the vent hood be available seperately, and will it support hood lifts like the QuickLift Elite?
Gus, will the vent hood be available seperately, and will it support hood lifts like the QuickLift Elite?
#54
The diffuser has a function benefit over the stock non-diffuser piece. It wont give you the aerodynamics of a Ferrari but it does help.
Last edited by SteedaGus; 12/23/09 at 11:33 AM.
#55
MOTM Committee Member
Hey Gus, have you guys started working on the 5.0 yet?
And if so, I know you can't provide any numbers yet, but in general how do you guys like the engine?
And if so, I know you can't provide any numbers yet, but in general how do you guys like the engine?
#56
Since we have been talking about seats in this thread, we do have a set of seats available right now. Not the show car's seats, but a set of our custom seats that I described earlier in this thread like what we would normally do on a Q-series car.
These are modified stock seats with improved bolstering cushions, new leather coverings and Steeda logo on the cushions. These are all black and will fit any 2010 Mustang. The rear seats have the new leather covering but no logos.
*******EDITED - Originally listed fitment as 2005-2010, although the seat brackets are all the same, it seems 2010 has a different connector for the electric power to the seats. 2010 has a rectangular connector for each seat. I looked at a 2005, and 06 and they have a square connector, looked at a 2009 and it looked it had the right connector on the passenger side seat, but the same incorrect square connector on the drivers side.*******
Here are some pictures of them.
If anyone is interested, 1,200 plus shipping takes them. Call me at 954-960-0774 or send me a PM.
These are modified stock seats with improved bolstering cushions, new leather coverings and Steeda logo on the cushions. These are all black and will fit any 2010 Mustang. The rear seats have the new leather covering but no logos.
*******EDITED - Originally listed fitment as 2005-2010, although the seat brackets are all the same, it seems 2010 has a different connector for the electric power to the seats. 2010 has a rectangular connector for each seat. I looked at a 2005, and 06 and they have a square connector, looked at a 2009 and it looked it had the right connector on the passenger side seat, but the same incorrect square connector on the drivers side.*******
Here are some pictures of them.
If anyone is interested, 1,200 plus shipping takes them. Call me at 954-960-0774 or send me a PM.
Last edited by SteedaGus; 12/23/09 at 01:14 PM.
#57
Gus
#58
Cobra Member
Where there even any good pics showing off the 315/35's tucked in there? What springs is it on? Even better if it is the Q350 on the Steeda Spyders (btw what do they weigh?)
Last edited by Shotokan1509; 2/24/10 at 07:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM