2013 V6 Automatic Issues (RPM Hang/Slow Shift) Issues
#21
NOT CURRENTLY ACTIVE ON THIS SITE! DO NOT USE PM FEATURE!
Join Date: October 25, 2010
Location: Dearborn, MI
Posts: 5,279
Likes: 0
Received 16 Likes
on
14 Posts
I had my '12 5.0 Premium dyno-tuned and now whenever I floor it in D...the engine revs to 5000 or so and absolutely no "go" for about 3-4 seconds. The car seems to actually die, and the revs slowly return to about 1500rpm before I get any gear/acceleration. This does NOT happen in 2nd or 3rd. IS THIS A "TUNE" PROBEM???
Deysha
#23
legacy Tms Member MEMORIAL Rest In Peace 10/06/2021
Join Date: September 16, 2009
Location: Clinton Tennessee
Posts: 3,377
Received 124 Likes
on
100 Posts
This is what I do every few months on my 2011 v6, should work on your Mustang too. Open the hood. There is a fuse box on the passenger side near the wheel well and radiator section. Open the fuse box and pull 'fuse number 47' for an hour or so. Put the fuse back in and go for a drive to see if it feels better. Works for me and a lot of other people
The following users liked this post:
Shant Dolabjian (7/14/19)
#24
thanks
i will try today
also i have high fuel problem for 10L fuel... driving only 27.9Mile i was scan with launch x431 there is no any error code
i will try today
also i have high fuel problem for 10L fuel... driving only 27.9Mile i was scan with launch x431 there is no any error code
Last edited by Shant Dolabjian; 7/14/19 at 06:32 AM.
The following users liked this post:
David Young (7/14/19)
Thread
Thread Starter
Forum
Replies
Last Post
ssjbuu
Repair and Service Help
6
8/28/15 08:55 AM