Latest mods: Roush chin splitter & dipped hood vents
#21
Legacy TMS Member
Thread Starter
Well, the DSS d/s is in, I don't feel anything up to about 100, and only minor something then. Had it up to 110 with no issues.
I didn't cruise at those speeds since it was just a quick spurt there, relax a bit, then quickly back down to sane speeds.
The biggest difference I feel after the work done today is in the shifting.
After a few minutes of driving I started noticing that when I put the shifter into a gear it feels like a little cushion is there now, that wasn't there before.
It feels "cushier" ... lol
I like it, it changed the shifting feel quite a bit.
I'd highly recommend this trans fluid to every MT82 owner out there ...
I took samples of the 5,000-mile Amsoil 10W40 XL from the engine, and the rear-diff fluid which is kinda gray.
I can't wait to see what Blackstone Labs has to say about these fluids ...
I didn't cruise at those speeds since it was just a quick spurt there, relax a bit, then quickly back down to sane speeds.
The biggest difference I feel after the work done today is in the shifting.
After a few minutes of driving I started noticing that when I put the shifter into a gear it feels like a little cushion is there now, that wasn't there before.
It feels "cushier" ... lol
I like it, it changed the shifting feel quite a bit.
I'd highly recommend this trans fluid to every MT82 owner out there ...
I took samples of the 5,000-mile Amsoil 10W40 XL from the engine, and the rear-diff fluid which is kinda gray.
I can't wait to see what Blackstone Labs has to say about these fluids ...
#22
Roush Forum Stalker
Awesome. Glad the install went well.
#23
Legacy TMS Member
Thread Starter
Finally tinted as of earlier today:
#25
Legacy TMS Member
Thread Starter
#26
Legacy TMS Member
Looks Good Gabe, now I need to put my Splitter on, figured I would wait until spring to do it.
And Like you the Gray and black will never get old
Mine came with the black Mirror Covers, I added the Louvers to match the theme
And Like you the Gray and black will never get old
Mine came with the black Mirror Covers, I added the Louvers to match the theme
#27
Roush Forum Stalker
She looks awesome Gabe!
#28
Legacy TMS Member
Thread Starter
Thanks guys, and I just noticed something as I was driving it just a little while ago and checking out reflections in store windows as I'm slowly driving by ... lol
It's SCREAMING for a GT500 rear spoiler !!!!
I NEED to get one ASAP!
Lol. No seriously, I want one bad!
It's SCREAMING for a GT500 rear spoiler !!!!
I NEED to get one ASAP!
Lol. No seriously, I want one bad!
#29
Roush Forum Stalker
Yeah, I agree. You have the Roush chin, now you need to add a little "something something" to the rear of that 'Stang.
#30
Shelby GT500 Member
Gabe
i m planning to get roush front chin splitters finally... convinced myself of cutting it.. took me 2 months to make up my mind.. i have one last concern... with our lowered setup, is it scrapping or having issues with ground clearance... also can u post a side view of this setup if you have one. thanks in advance.
i m planning to get roush front chin splitters finally... convinced myself of cutting it.. took me 2 months to make up my mind.. i have one last concern... with our lowered setup, is it scrapping or having issues with ground clearance... also can u post a side view of this setup if you have one. thanks in advance.
#31
Legacy TMS Member
Thread Starter
Gabe
i m planning to get roush front chin splitters finally... convinced myself of cutting it.. took me 2 months to make up my mind.. i have one last concern... with our lowered setup, is it scrapping or having issues with ground clearance... also can u post a side view of this setup if you have one. thanks in advance.
i m planning to get roush front chin splitters finally... convinced myself of cutting it.. took me 2 months to make up my mind.. i have one last concern... with our lowered setup, is it scrapping or having issues with ground clearance... also can u post a side view of this setup if you have one. thanks in advance.
These are the best pics I have showing the front from the side:
#33
Bullitt Member
Join Date: March 17, 2010
Location: Farmington Hills, MI
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Gabe
i m planning to get roush front chin splitters finally... convinced myself of cutting it.. took me 2 months to make up my mind.. i have one last concern... with our lowered setup, is it scrapping or having issues with ground clearance... also can u post a side view of this setup if you have one. thanks in advance.
i m planning to get roush front chin splitters finally... convinced myself of cutting it.. took me 2 months to make up my mind.. i have one last concern... with our lowered setup, is it scrapping or having issues with ground clearance... also can u post a side view of this setup if you have one. thanks in advance.
#34
What grille is that? Looks kind of like Roush, but not quite. Do you still have your fogs back there?
#35
Shelby GT500 Member
#36
so the stock grille is still behind it? can you still see it or is it pretty well hidden? I realize in the pics it looks pretty well hidden but in person. I guess this is a question for Gabe.
#37
Legacy TMS Member
Thread Starter
Had to take off the bumper cover to install the grilles:
Ready for the fog lights to be re-installed:
Fogs re-installed:
#39
Legacy TMS Member
Thread Starter
#40
Member
Join Date: October 4, 2013
Location: Saint Louis
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Dip for Hood Vents..
Hi Gabe,
I've been hearing more & more about this "Dip" to use on the Hood Vents. Can you please tell me more about the Dip? (ie. What it is, where to get it at, what it costs, how much it takes to do 2 vents, drying time, etc...).
I've been hearing more & more about this "Dip" to use on the Hood Vents. Can you please tell me more about the Dip? (ie. What it is, where to get it at, what it costs, how much it takes to do 2 vents, drying time, etc...).