Painted my Brembos
10/28/12, 06:28 PM
#1
Mach 1 Member
Thread Starter
Painted my Brembos
I ordered the G2 caliper paint and Brembo decals from Flea Bay. It went on fairly easy, two coats. I tried to mask off the silver end bolts, but they just didn't turn out well, so I painted over them. I may try and find some small round silver overlays for them.
The problem with the G2 is that once you mix the accelerator into the paint it starts to harden after 4-6 hours. Due to other reasons, I didn't have time to do the rears, so I had to order another batch. I should be able to do the rears on Friday.
It's a little pricey, but good stuff. If you get it on your hands or anything else, it's hard to get off, so mask carefully.
Had the camera on the wrong setting, so that's why it's blue.
The problem with the G2 is that once you mix the accelerator into the paint it starts to harden after 4-6 hours. Due to other reasons, I didn't have time to do the rears, so I had to order another batch. I should be able to do the rears on Friday.
It's a little pricey, but good stuff. If you get it on your hands or anything else, it's hard to get off, so mask carefully.
Had the camera on the wrong setting, so that's why it's blue.
10/29/12, 11:44 AM
#12
Mach 1 Member
Thread Starter
10/29/12, 05:58 PM
#16
Mach 1 Member
Thread Starter
10/29/12, 06:00 PM
#17
Originally Posted by TommyV
Umm, Porsche, Ferrari, Corvette?
Last edited by 11SHELBYGT500; 10/29/12 at 06:03 PM.
10/29/12, 06:18 PM
#19
Originally Posted by TommyV
I did it because I think it looks better than the dark brown finish on them. I was just pointing out that others do also.
10/29/12, 07:15 PM
#20
Mach 1 Member
Join Date: July 5, 2012
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 11SHELBYGT500
As long as you like it,that's all that matters. I was just stating that I didn't understand it.