New videos of my Mustang with Jon Lund Cammed Tune.
12/16/11, 08:01 AM
#1
Bullitt Member
Thread Starter
Join Date: September 26, 2011
Location: Santa Rosa Beach, FL
Posts: 278
Likes: 0
Received 1 Like
on
1 Post
New videos of my Mustang with Jon Lund Cammed Tune.
I posted up a couple of new videos with my Jon Lund Cammed tune. Sounds SO sweet!
Going with the aftermarket Flowmaster Super 44's has turned out to be such a wonderful decision. Stock headers, BBR O/R X-Pipe, stock pipe back to the Flows. The stock resonators do an awesome job of keeping the tone clean, crisp and deep. Summit Racing has them $79 each, but check your local exhaust shops because they will typically give you a good deal on the mufflers if you get them to weld them in with new tips. You can also have them cut the tips off of your stock mufflers and weld them on the Flows.
I had my BBR O/R X-Pipe and the Flows welded in for slightly under $300. I think it was $289 or so.
And, of course, my exterior/interior sound video.
So, what cha think? Do I need to also do a video with my regular tune?
Going with the aftermarket Flowmaster Super 44's has turned out to be such a wonderful decision. Stock headers, BBR O/R X-Pipe, stock pipe back to the Flows. The stock resonators do an awesome job of keeping the tone clean, crisp and deep. Summit Racing has them $79 each, but check your local exhaust shops because they will typically give you a good deal on the mufflers if you get them to weld them in with new tips. You can also have them cut the tips off of your stock mufflers and weld them on the Flows.
I had my BBR O/R X-Pipe and the Flows welded in for slightly under $300. I think it was $289 or so.
And, of course, my exterior/interior sound video.
So, what cha think? Do I need to also do a video with my regular tune?
12/17/11, 08:26 AM
#6
Bullitt Member
Thread Starter
Join Date: September 26, 2011
Location: Santa Rosa Beach, FL
Posts: 278
Likes: 0
Received 1 Like
on
1 Post
That's how they come from ASA. Which is why they caught my attention at first. I liked the "inner lip" look of them over the RTR's. Plus, these only weigh 23lbs each and I got them for right at $200 per wheel. They have been awesome wheels over the last year and 8,000 miles.
12/25/11, 05:25 PM
#12
Bullitt Member
Join Date: November 1, 2010
Location: Slower Lower Delaware
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
12/26/11, 02:04 PM
#13
Mach 1 Member
12/29/11, 02:20 AM
#16
12/29/11, 10:02 AM
#17
Mach 1 Member
12/29/11, 07:18 PM
#18
1/2/12, 09:06 AM
#19
Member
Join Date: December 30, 2011
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Sucks the cammed tune cannot be used on the automatics. I run a Bama 91 tune but ordered Jon Lund recently and he replied saying the
Cammed Tune is not available on the automatics due to the surge of the Lope idle on the convertor
Last edited by calgarybandit; 1/2/12 at 09:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
1
7/21/15 10:32 AM