HELP! want resonators off - anyone know a fair shop in/around Sterling VA??
#21
Eric, give this guy a call for the OTA. Unfortunately he sold the A/B already and was willing to sell me both for $200. He will let the OTA go for $100. It will fit on your's since you have the slip on style clamps. He's a straight shooter, nice guy and spoke with him several times. GL man http://www.svtperformance.com/forums...iles-them.html
#22
Thanks all. I found a shop to do it. Sterling Hot Rods, Tom is a super cool guy, great shop. The pipe has been ordered, I go back in later in the week......for it to be welded. Can't wait!!
#24
GT Member
Join Date: June 18, 2012
Location: Halethorpe, MD
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Eric, give this guy a call for the OTA. Unfortunately he sold the A/B already and was willing to sell me both for $200. He will let the OTA go for $100. It will fit on your's since you have the slip on style clamps. He's a straight shooter, nice guy and spoke with him several times. GL man http://www.svtperformance.com/forums...iles-them.html
#25
Currently a Corvette Owner!
#27
Diva,
Hi, OP here (Jon) I tell you what.....I get my resonators off tomorrow. Let's meet in DC, (I work at GWU) I'll bring out "The Grey Ghost", and we can make each other jelly.
Hi, OP here (Jon) I tell you what.....I get my resonators off tomorrow. Let's meet in DC, (I work at GWU) I'll bring out "The Grey Ghost", and we can make each other jelly.
#28
GT Member
Join Date: June 18, 2012
Location: Halethorpe, MD
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Eric, give this guy a call for the OTA. Unfortunately he sold the A/B already and was willing to sell me both for $200. He will let the OTA go for $100. It will fit on your's since you have the slip on style clamps. He's a straight shooter, nice guy and spoke with him several times. GL man http://www.svtperformance.com/forums...iles-them.html
#32
Shelby GT500 Member
Join Date: March 3, 2004
Location: Richmond VA
Posts: 2,633
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheDivaDanielle
honestly, I just went to a Midas. The work may be exhausting, but it's not all that much to be overly picky in finding a shop.
#33
Finally got this done......and although the Hot Rod shop I went to was quite meticulous in their approach/quality of work....I ended up paying almost double what the owner originally quoted.....but still under what the schmoe's at the muffler shops were hinting at.
Tis ok, I make a decent living.
Now, as far as this being occasionally touted as a "subtle" mod......NO WAY. It completely changes the tone of the system, as well as the volume. Now, the car sounds like a bonifed beast. The GT500's sound twice as loud, and the over-rev, and gear changes sound just nasty (in a good way!) The car turns heads now.....everywhere. It finally sounds as mean as it should. Worth every penny, and absolutely ZERO drone.
Tis ok, I make a decent living.
Now, as far as this being occasionally touted as a "subtle" mod......NO WAY. It completely changes the tone of the system, as well as the volume. Now, the car sounds like a bonifed beast. The GT500's sound twice as loud, and the over-rev, and gear changes sound just nasty (in a good way!) The car turns heads now.....everywhere. It finally sounds as mean as it should. Worth every penny, and absolutely ZERO drone.
#34
They choke down to approx 2" and even less at the actual core. They weigh approx 9lbs for the pair, power wise guess you have to keep the faith IMHO it gains approx 10-15% overall volume at WOT and yet maintains the same pitch. You wont lose that perfect balance of volume between the CAI/GT 500 AB if you have one. You have to check your State for legal issues. No drone but that slight popping you have now while decelerating might increase. My X-pipe seemed to have subdued some of that. Maybe someone else can chime in to be certain. Resonators at the core walls breaks up the sound waves and in turn help cancel each other out. It only helps the muffler out so its mainly the reason you wont pick up obnoxious volume. The only CON I can think of is shelling out the dough to get it done
#35
Shelby GT350 Member
Join Date: May 6, 2012
Location: Crofton MD
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
I don't think I could go to a Midas, I was looking to get the stock ball and socket flanges cut and have some 2 or 3 bolt flanges slipped over and then welded back up, feel like that would be a tad expensive though.
#36
Im not understanding bro, your'e looking into removing the resonators correct? They are located at the straight section of the pipe.The ball and socket clamp is located at the joint with the mufflers, its a band clamp toward the front. Is the Boss different? Mr. Muffler on 301 crain highway..30 minute drive straight down 301 south from you.
Last edited by autobred; 9/24/12 at 04:28 PM.
#37
Shelby GT350 Member
Join Date: May 6, 2012
Location: Crofton MD
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
Im not understanding bro, your'e looking into removing the resonators correct? They are located at the straight section of the pipe.The ball and socket clamp is located at the joint with the mufflers, its a band clamp toward the front. Is the Boss different? Mr. Muffler on 301 crain highway..30 minute drive straight down 301 south from you.
#39
Shelby GT350 Member
Join Date: May 6, 2012
Location: Crofton MD
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
I went by MBS Tuesday and Tim assured me that I had no leak, which was very nice even though he assured me he would do the work I had asked if he could do. Thankfully the reason I thought I had a leak was because my cats have started making noise because the exhaust is less restrictive.
#40
GT Member
Join Date: June 18, 2012
Location: Halethorpe, MD
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Now, I see a lot if threads about drone for you folks with the 11' and up when ditching the resonators.... I also have a set of MBRP bullet mufflers waiting to go on, do the 4.6's have any issues with drone? I'm prolly going to pop the mufflers on first for a day, then the OTA's. and see how things differ.