That's pretty friggin cool....

Tony, If Dave is right, I'm planning on doing the same.

 

David is right on the money,I would like to see the stock bar.If i can modifiy it someone can have my stock one.If i can't then i will have to buy one. i don't want to pull mine out and have the car down but i do need to move thr rear over just something i want to do. The car still sets 1/2'' lower on the passenger side than the drivers.I just can't tell if they the springs are in right.What would let one side be lower than the other.I checked them at work and they were even,came back from lunch and they were off again.I am headed to the shop now and look things over.Hey how bout them sooners?

 

Next weekend would be a good time to do a drive by to eureka springs.It's the corvette SPRING WEEKEND.Naw,they would just bug us to much,wanting to trade.Especially the vista blue ones.

 

Tony... It's really nothing more than a bar with a two ends on it and a couple poly bushings. Pretty simple. I was going to lop one end off and weld a spherical rod end on.

BTW- I looked at Lowes for them, they didn't have them. Does anyone know where one can buy spherical rod ends locally?

I found some on the web.... Looks like they sell in bulk though...

 

4-0 baby! Favre broke Marino's TD record! BTW- both of my Wisconsin football teams are undefeated! Thanks to OU and the rest of the posers losing this weekend... The Badgers move up to an undfeated 5th in the rankings...

 

My Nittany Lions fell on their face also....So much of competing for the Big 10 championship.

 

OSU gave a spanking to OUs money grubben quarter back Rhett Bomar and his sam houston state team

 

This is wrong.... http://video.google.com/videoplay?do...13330707759731

 

Here's the Record Breaker... http://video.google.com/videoplay?do...arch&plindex=3

 

I think the carb is running a tad rich.... I would guess someone restoring that GN was inhaling at one time in their life.... WTF!!!

 

Nice!!! I good man to have the record!!! And they are playing well also!!

 

Never been a big GM fan, But always kinda liked the GNs

 

Yes, the GN wasn't a bad car. Had a good look and that V6 Turbo ran pretty good...

 

good stuff

 

I think both ends will have to have threaded ends,one left hand and one right hand.The bar needs to be hollow so it can be threaded.I will call car fx and see if he has one laying around..Grainger might carry the parts,if not they will be easy to find.I'll do some research tomorow.

 

NOT CARFX! Beware.... He'll charge you probably $500....

 

The Steeda one is like a buck fifty. I'm sure the stocker is hollow knowing the bean counters at Job One.

 

THe BMR is around the same price

 

hey dad, you never commented about the hott chick i put in your avatar! whacha think?

 

Interesting.