Rocket City Mustang Club Huntsville, Alabama Chapter of The Mustang Club of America

first attempt at tinting windows....not too shabby but not perfect either.

Old 4/22/07, 04:17 PM
  #1  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
first attempt at tinting windows....not too shabby but not perfect either.

I was gonna do this on the side after I do a couple of family cars first.

I did the cobra today with 20% Gila tint and I did the back side windows pretty well, very few (like maybe 3 small small bubbles (barely seeable upon inspection) minimal bubbles. then I attempted to do the driver side window and while it works it isn't the prettiest, I have a crease cause I couldn't get the tint under the weather stripping the way I wanted to cause it's real tight and I thought I got the window pretty clean but apparently not, I ended up with quite a few bubbles....I think the solution underneath the film was drying so fast cause it was warm out...I'll take pics of it if anyone is interested in cheaper then the going rate for tint jobs....just know nothing is perfect.

but I'm gonna strip it and attempt again next weekend, no garage and no helping hands makes it somewhat difficult. it's pretty dark but not too dark for my tastes, I ran out of tint to do the passenger side but I'll do that next week when I do the driver side again. I figure 20 % isn't too dark for local leo's to get upset at me....I always turn the light on if I get pulled over at night anyway....it's usually a good idea and let's them know you have nothing to hide from them.

anyway, if
anyone wants tinted windows done anytime soon I'll do a whole mustang from someone on this site for 80 bucks, normal rates for a shop to do it is about 150.

I won't be starting it until I am happy with my own results (I'm a perfectionist, so don't worry)

anyway if your interested let me know. if anyone has done it and has some insight as to better ways to do it then the application solution and squeegee, let me know.

I know most people are do it yourselfers, but some people don't like messing with the tint....
Old 4/22/07, 04:23 PM
  #2  
GT Member
 
65stangman's Avatar
 
Join Date: January 18, 2007
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
I think those guys use heat guns to help dry it faster. I have tried many times and have never had good luck. I am just not meant to tint windows. Good luck on your future windows.
Old 4/22/07, 04:27 PM
  #3  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
my brother in law has a friend that did mine and it was absolutely perfect....I but then again he was in a temp controlled environment with a cool vehicle and once he had it all squeegeed he heat gunned it....if I ever get a garage I'm going to do it this way...

I have to make the cobra to my liking first of course and then I'm moving on to an 06 stang and then the front of an 01 expedition and possibly a 98 gt (if new buyer wants it.)
Old 4/22/07, 07:27 PM
  #4  
Legacy TMS Member
 
Mirage775's Avatar
 
Join Date: February 25, 2007
Posts: 126
Received 4 Likes on 3 Posts
I did mine Thursday night and the rear window looks like ****! Mainly because I got ****ed off, because I was having difficulties and was also tired as hell, but it's on there and I'm not worried about it right now. When I get some extra cash, I'll take it to a professional.
Old 4/22/07, 10:24 PM
  #5  
Bullitt Member
 
Grabber Pony's Avatar
 
Join Date: August 23, 2006
Posts: 426
Likes: 0
Received 0 Likes on 0 Posts
we did our side windows with 5% limo haha.. its dark but maaan it looks SOOOO good with the top up!! Just kinda tinkering with it.. ended up keeping it.. we didnt have a squeegee so we used my drivers liscense tint is a little scratched up.. but i'll have it redone professionally later on... biggest thing.. make sure your windows are all the way up before tinting lol one side wasnt completely us so we have a tiny gap at the bottom..
Old 4/22/07, 11:17 PM
  #6  
Cobra R Member
 
Puter's Avatar
 
Join Date: January 19, 2007
Location: Huntsville, Alabama
Posts: 1,494
Likes: 0
Received 0 Likes on 0 Posts
I guess y'all know that the law is 32% on the sides. If ya go darker and get a ticket, please do not do as I have seen others do and whine. It's kinda like ridin' around without your seatbelt on. If they see it and pull you over, accept the ticket without blaming the cop.

If you are interested in buying a tint setup, a friend may still have one for sale.
Old 4/23/07, 06:56 AM
  #7  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
no I won't biatch about a tint ticket....I don't gripe about tickets if I did do it and deserved it....if I get caught doing 90 in a 60....I expect that ticket.....so you won't hear me complain....I put police in the highest respects
Old 4/23/07, 06:57 AM
  #8  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
pm me about the tint setup....
Old 4/23/07, 10:05 AM
  #9  
GT Member
 
kkucera's Avatar
 
Join Date: April 15, 2006
Posts: 171
Likes: 0
Received 0 Likes on 0 Posts
I've done flat windows in a van, and they aren't too hard. I'd hate to try to do the back window of a 05-07. I got mine done when they had a $99 special.
Old 4/23/07, 11:50 AM
  #10  
Cobra R Member
 
Puter's Avatar
 
Join Date: January 19, 2007
Location: Huntsville, Alabama
Posts: 1,494
Likes: 0
Received 0 Likes on 0 Posts
*points up*
As well as doing the back of a Fox coupe in one piece.
Old 4/24/07, 04:38 AM
  #11  
Legacy TMS Member
 
Mirage775's Avatar
 
Join Date: February 25, 2007
Posts: 126
Received 4 Likes on 3 Posts
The last I heard about tint laws was 35% on the drivers/passengers doors and 20% on all other windows. Is that still current? Also, last Tuesday, one of these tint nut shops in H'ville wanted to charge me $250 to do my car. I'll continue to look elsewhere, when I get ready for a proffesional tint job.
Old 4/24/07, 06:32 AM
  #12  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
there is a place on university that uses lifetime llumar tint that has nothing but 20's in the showroom, it's down on the opposite side of the street near barnhill's.....yes the local law is front 35% backs 20% I'm breaking the law....as I have for the last 5 years without a single problem.
Old 4/24/07, 03:01 PM
  #13  
Legacy TMS Member
 
Mirage775's Avatar
 
Join Date: February 25, 2007
Posts: 126
Received 4 Likes on 3 Posts
I was running illegal tint on one of my old trucks back in the day, 5% on the rear and 20% on the sides and never got pulled over
Old 4/24/07, 03:05 PM
  #14  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
20% is nice and dark but not so dark it would scare a cop if the lights on the inside were turned on (5%) you can't even see in without a BRIGHT light on the inside....
Old 4/24/07, 04:09 PM
  #15  
Bullitt Member
 
Greg G's Avatar
 
Join Date: January 19, 2007
Posts: 231
Likes: 0
Received 2 Likes on 2 Posts
Pictures

this thread is boring without pictures
Old 4/24/07, 04:19 PM
  #16  
Bullitt Member
Thread Starter
 
virginiavenom's Avatar
 
Join Date: January 21, 2007
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
http://viewmorepics.myspace.com/inde...mageID=6402637

let me know if link doesn't work.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kponypower
GT
13
6/17/20 07:17 AM
robjh22
'10-14 Exterior Modifications
3
10/9/15 02:49 PM
austin101385
'10-14 Shelby Mustangs
3
10/2/15 01:00 PM
earl610
GT
7
9/7/15 11:57 AM
earl610
GT
1
9/6/15 05:48 PM


Thread Tools
Search this Thread
Quick Reply: first attempt at tinting windows....not too shabby but not perfect either.



All times are GMT -6. The time now is 01:18 AM.