Shelby Chrome 20 x 9 inch Razor wheels.
1/13/11, 10:00 AM
#22
Bullitt Member
This is the best deal around http://www.americanmuscle.com/tpms-fullkit.html You get 4-Ford OEM sensors, 4-bands and the syncing tool. That way you don't have to dismount your old tires and can use them again or sell them. I used it when I got my new wheels. The bands with this kit can also be re-used, unlike the OEM Ford. They resemble giant hose clamps with a worm drive screw to tighten.
1/13/11, 06:53 PM
#23
Cobra R Member
Thread Starter
Join Date: February 18, 2008
Location: Biloxi,Mississippi
Posts: 1,511
Likes: 0
Received 1 Like
on
1 Post
This is the best deal around http://www.americanmuscle.com/tpms-fullkit.html You get 4-Ford OEM sensors, 4-bands and the syncing tool. That way you don't have to dismount your old tires and can use them again or sell them. I used it when I got my new wheels. The bands with this kit can also be re-used, unlike the OEM Ford. They resemble giant hose clamps with a worm drive screw to tighten.
1/13/11, 07:45 PM
#27
Bullitt Member
Good looking tire! I would have gotten them but they don't come in the size I need. My brother is running the same tire on the back of his '68 Camaro in a 335 width and he likes them.
Last edited by goldhillstang; 1/16/11 at 09:26 PM.
1/14/11, 05:27 PM
#28
Cobra R Member
Thread Starter
Join Date: February 18, 2008
Location: Biloxi,Mississippi
Posts: 1,511
Likes: 0
Received 1 Like
on
1 Post
,don't let the wife see you looking 
must be the car,girls digg the cars.
Last edited by ricksGT/CS; 1/14/11 at 05:28 PM.
1/15/11, 06:33 PM
#29
Cobra R Member
Thread Starter
Join Date: February 18, 2008
Location: Biloxi,Mississippi
Posts: 1,511
Likes: 0
Received 1 Like
on
1 Post
I have alittle problem with my wheel set up,after looking closer today,I see a have three wheels with a 40mm offset and just one with a 24mm off set 
,I have already called and wrote ebay seller about this ,might have to wait until Monday to see what happens,should a stay with the 40mm ask for one more or go three more 24mm, I have been told that the 40mm are rare,this is the only problem ,hopefully just a over looked mistake by the seller,with the 40mm I will have to buy new ( longer ) wheel studs,this means braking down the brakes 
???more cost added,thanks for looking in.
,I have already called and wrote ebay seller about this ,might have to wait until Monday to see what happens,should a stay with the 40mm ask for one more or go three more 24mm, I have been told that the 40mm are rare,this is the only problem ,hopefully just a over looked mistake by the seller,with the 40mm I will have to buy new ( longer ) wheel studs,this means braking down the brakes ???more cost added,thanks for looking in.
1/16/11, 12:48 PM
#31
Cobra R Member
Thread Starter
Join Date: February 18, 2008
Location: Biloxi,Mississippi
Posts: 1,511
Likes: 0
Received 1 Like
on
1 Post
I have alittle problem with my wheel set up,after looking closer today,I see a have three wheels with a 40mm offset and just one with a 24mm off set ,I have already called and wrote ebay seller about this ,might have to wait until Monday to see what happens,should a stay with the 40mm ask for one more or go three more 24mm, I have been told that the 40mm are rare,this is the only problem ,hopefully just a over looked mistake by the seller,with the 40mm I will have to buy new ( longer ) wheel studs,this means braking down the brakes ???more cost added,thanks for looking in.
,I have already called and wrote ebay seller about this ,might have to wait until Monday to see what happens,should a stay with the 40mm ask for one more or go three more 24mm, I have been told that the 40mm are rare,this is the only problem ,hopefully just a over looked mistake by the seller,with the 40mm I will have to buy new ( longer ) wheel studs,this means braking down the brakes ???more cost added,thanks for looking in. 
1/16/11, 01:01 PM
#32
Cobra R Member
Thread Starter
Join Date: February 18, 2008
Location: Biloxi,Mississippi
Posts: 1,511
Likes: 0
Received 1 Like
on
1 Post
here are a few pictures of the wheels I got and my problem, Attachment 82616
Attachment 82617
Attachment 82618
Attachment 82619
Attachment 82620
Attachment 82616Attachment 82617
Attachment 82618
Attachment 82619
Attachment 82620
1/16/11, 05:53 PM
#33
Bullitt Member
Right now I'm running Dunlop SP Sportmaxx in 275/35/20 all the way around. They are great, but very pricey @ around $250 each. I got a set of 4 off of craigslist with about 200 miles on them for $350. Next time around I'm thinking about a set of staggered Nittos, maybe Invos or NT 555's.
Good luck getting the offset problem straightened out. Hopefully the ebay seller will make it right without any hassle!
1/20/11, 05:29 PM
#35
Member
Join Date: January 19, 2011
Location: Fairfield Ca
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ricksGT/CS
new wheel sensors are $ 124.00 each and wheel bands are $ 55.00 each at Ford dealership ,thinking about getting a set of ( 4 ) new bands off ebay for $ 80.00,and just reuse my old stock ones off my 18 inch wheels,that way I am hoping I want have to do another wheel air sensor CAL,on the new wheels,if anyone has anything to add ,,,NOW is the time to post in ,thanks, 
1/28/11, 10:26 PM
#37
Cobra R Member
Thread Starter
Join Date: February 18, 2008
Location: Biloxi,Mississippi
Posts: 1,511
Likes: 0
Received 1 Like
on
1 Post
here are a few pictures of the wheels I got and my problem, Attachment 82616
Attachment 82617
Attachment 82618
Attachment 82619
Attachment 82620
Attachment 82616Attachment 82617
Attachment 82618
Attachment 82619
Attachment 82620
1/30/11, 03:37 AM
#40
Mach 1 Member
Join Date: February 24, 2010
Location: Surrey BC, Canada
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
What offset did you end up going with? +40mm is closer to stock.....+24mm is for a more aggressive stance and will clear big brakes if you decide to go that route down the road.
TacoBill runs 265/35/20 all the way round with no problems. 265 fits really nice on a 9 inch wide rim. The tire wall looks perfect (i.e. not bulging or stretched).......though I am very happy with my 255/35 out front and 275/35 in the back. I like the staggered raked look!
You made a good choice by going with the Shelby Razors! For the other post.....about black shelby razors....they do come naturally in black.
TacoBill runs 265/35/20 all the way round with no problems. 265 fits really nice on a 9 inch wide rim. The tire wall looks perfect (i.e. not bulging or stretched).......though I am very happy with my 255/35 out front and 275/35 in the back. I like the staggered raked look!
You made a good choice by going with the Shelby Razors! For the other post.....about black shelby razors....they do come naturally in black.