RTR VS AMR wheels
#21
Shelby GT350 Member
I have own a set of all these wheels (RTR, AMR and AG) and from my personal experience AG and RTR may be manufactured by the same company but they are different.
The AG have a different offset and the paint finish is also different, the AG are more of a satin finish where RTR are more mat.
Here's a quick compare on the 3 in 19" version (AG have 18", 19" or 20")
Avant Garde M310
19" x 8.5" (35mm offset)
19" x 9.5" (40mm offset)
RTR Wheels
19" x 9.5" (33mm offset)
AMR Wheels
19" x 8.5". (30mm offset)
19" x 9.5". (48mm offset)
Just for info when I had the RTR the wheels were a bit outside the fender, the AMR were a bit too much inside and I had to add spacers for a flush fit and the AG are perfects
The AG have a different offset and the paint finish is also different, the AG are more of a satin finish where RTR are more mat.
Here's a quick compare on the 3 in 19" version (AG have 18", 19" or 20")
Avant Garde M310
19" x 8.5" (35mm offset)
19" x 9.5" (40mm offset)
RTR Wheels
19" x 9.5" (33mm offset)
AMR Wheels
19" x 8.5". (30mm offset)
19" x 9.5". (48mm offset)
Just for info when I had the RTR the wheels were a bit outside the fender, the AMR were a bit too much inside and I had to add spacers for a flush fit and the AG are perfects
You're giving out bad information right now, I'm a direct vendor for CDC. These are not made by the same company. VMR make the RTR wheels for CDC, so whoever told you this information from CDC was mistaken. I'm also a direct dealer for Avant Garde and have personally ran the M310's as well as tracked the **** out of them... they're great quality and the color on them are nicer in my opinion.
I think this debate is settled.
#23
Shelby GT350 Member
#24
I Have No Life
#25
Thread
Thread Starter
Forum
Replies
Last Post
Steve@CJPP
Vendor Showcase
1
9/15/15 06:20 AM