How many would install paddle shifters into their 13/14 auto Mustangs?
Thread Starter
Legacy TMS Member
Joined: November 7, 2006
Posts: 2,792
Likes: 57
From: Alberta
Part number for the paddles was 1712670046 and they are AMG paddles.
You will need to contact Tim Stone at LXCS and tell him you want this for a 13/14 Mustang. He will know that I sent you.
You will need to contact Tim Stone at LXCS and tell him you want this for a 13/14 Mustang. He will know that I sent you.
Mach 1 Member
Joined: April 13, 2014
Posts: 772
Likes: 25
From: Indiana
Thread Starter
Legacy TMS Member
Joined: November 7, 2006
Posts: 2,792
Likes: 57
From: Alberta
Write up is coming, it just takes time to do it and sort through the pics.
I drove around with it yesterday, and I love it. Works good and the feel of the paddles is great.
Some notes are that you WILL be cutting and drilling into your wheel for this. You will also be adding wires into the clockspring. That is about it, though. If you are comfortable with that, then I say this mod is a MUST for 13/14 automatic cars.
It CAN be done for 11/12 cars (mine is a 2012), but you are looking at reprogramming the PCM and running wires from the PCM to the steering column.
I drove around with it yesterday, and I love it. Works good and the feel of the paddles is great.
Some notes are that you WILL be cutting and drilling into your wheel for this. You will also be adding wires into the clockspring. That is about it, though. If you are comfortable with that, then I say this mod is a MUST for 13/14 automatic cars.
It CAN be done for 11/12 cars (mine is a 2012), but you are looking at reprogramming the PCM and running wires from the PCM to the steering column.
Thread Starter
Legacy TMS Member
Joined: November 7, 2006
Posts: 2,792
Likes: 57
From: Alberta
I have put the how to thread in the 5.0 performance mods, as that seems like the best place for it:
https://themustangsource.com/forums/...6/#post6947308
https://themustangsource.com/forums/...6/#post6947308
GT Member
Joined: April 21, 2014
Posts: 103
Likes: 5
From: Kentucky
I contacted him and I think there is some confusion. It seems that he thinks your name is Javier. Lol. I think by what he is saying you are the right person though. Are you basically using the same components that are used for the mopar LX cars that he sells?
GT Member
Joined: April 21, 2014
Posts: 103
Likes: 5
From: Kentucky
$200 for the paddles and the control module. I know it is alot, but I will get good paddles that look OEM and match the interior.
Now if only the car's shifting can match my nice new shiny paddles.
I may not get to the other mods this weekend, but I will do this mod, as it is simple enough and not that involving.
I will do a write up with pics.
Now if only the car's shifting can match my nice new shiny paddles.
I may not get to the other mods this weekend, but I will do this mod, as it is simple enough and not that involving.
I will do a write up with pics.
Thread
Thread Starter
Forum
Replies
Last Post