2010-2014 Ford Mustang S-197 Gen II Lets see your latest Pics PHOTO GALLERY
GT Member
Joined: May 30, 2013
Posts: 133
Likes: 0
From: Charleston, SC
You know I have a set of LEDs laying around in the garage that I think I am going to mount down there after seeing yours. How did you wire yours in? TIA
Mach 1 Member
Joined: March 6, 2012
Posts: 866
Likes: 1
From: Quebec
I hope this helps.
Last edited by Nighthawk13; Jul 9, 2013 at 07:09 PM. Reason: Fix
GT Member
Joined: April 11, 2007
Posts: 138
Likes: 0
From: Smyrna, Ga
GT Member
Joined: May 30, 2013
Posts: 133
Likes: 0
From: Charleston, SC
Since the Canadian 2013 Mustangs use the fogs as DRLs, it's mandatory that they are always on during the day. It screws up the ballast on the HIDs fog-lights since its constantly turning on and off. So my solution is to wire the LEDS to the foglight switch. I then had a two round switches (one for future use) under the headlight switch **** to turn on the fogs. I have relays installed on both.
I hope this helps.
I hope this helps.
I Have No Life
Joined: September 24, 2011
Posts: 10,141
Likes: 172
Doug, I didn't know you had 13 lights in your 12? How's the blower?
Lots of winning going on in this thread. I'll have to post some pics of my 07 GT once we get more of our lighting goodies on it! 
Tasca Super Boss 429 Member
Joined: December 11, 2007
Posts: 7,575
Likes: 11
From: Uxbridge, MA
Banned
Joined: July 9, 2013
Posts: 297
Likes: 0
From: Somewhere USA
[QUOTE=Twin Turbo;6654153]
Because I am new here I was just trying to get some post in, but thanks for the comment, you just gave me one more post for answering your question. 
Last edited by B's 5.0; Jul 10, 2013 at 06:39 PM.
Mach 1 Member
Joined: March 6, 2012
Posts: 866
Likes: 1
From: Quebec
Thanks
http://www.rostra.com/universal-dayt...-by-rostra.php
Yes they were custom fitted by my speedshop. I wanted them flush to the bumper but because Rostra didn't make a bezel for the 2013 Mustang, they suggested that this would look better.
http://www.rostra.com/universal-dayt...-by-rostra.php
Yes they were custom fitted by my speedshop. I wanted them flush to the bumper but because Rostra didn't make a bezel for the 2013 Mustang, they suggested that this would look better.
Legacy TMS Member
Joined: August 7, 2011
Posts: 5,246
Likes: 567
From: NC
You don't have to answer to this if you don't want, although answering it would raise your count by another all-important ONE, lol
Today I took the car to a local (usually large) show.
A professional photographer was there taking pics of random cars, he took a few of mine.
This is the first one he's posted (so far):
2013 RR Boss 302 #2342
Joined: March 6, 2012
Posts: 11,801
Likes: 2,412
From: Lancaster, PA
Cobra R Member
Joined: July 17, 2012
Posts: 1,906
Likes: 4
From: Virginia
You know moderators have ways to adjust your actual post count so it shows a lower number, right?
You don't have to answer to this if you don't want, although answering it would raise your count by another all-important ONE, lol
Today I took the car to a local (usually large) show.
A professional photographer was there taking pics of random cars, he took a few of mine.
This is the first one he's posted (so far):
Legacy TMS Member
Joined: August 7, 2011
Posts: 5,246
Likes: 567
From: NC
Mach 1 Member
Joined: August 9, 2012
Posts: 1,760
Likes: 0
From: NC
You know moderators have ways to adjust your actual post count so it shows a lower number, right?
You don't have to answer to this if you don't want, although answering it would raise your count by another all-important ONE, lol
Today I took the car to a local (usually large) show.
A professional photographer was there taking pics of random cars, he took a few of mine.
This is the first one he's posted (so far):
