Transformers III- The Resurrection
Post *****
Joined: October 9, 2007
Posts: 32,808
Likes: 163
Team Mustang Source
Joined: January 5, 2005
Posts: 13,223
Likes: 14
Thread Starter
Cobra R Member
Joined: December 21, 2004
Posts: 1,617
Likes: 3
From: The Alamo
I am going to make another push bumper to correct several issues that (I swear)
can only be discovered during the fab process but I dont have time before the big
event soooo this one is going to powdercoating on Monday.
I spent 10 hours yesterday working on the brackets. The good news is I can reuse the brackets
so its 4 bolts to bolt on the future upgraded version.
#2 will be tucked in about an inch and a half closer to the bumper. It will also be wider by 4 inches and the base will not be as long. That should even out the weight of 3 pipes X 4" more worth of tubing.
Its very hard keeping it from twisting when you are welding it.
Anyways...enough of the "issues"....This one will be on the car for Mustangfest (but powdercoated black):
can only be discovered during the fab process but I dont have time before the big
event soooo this one is going to powdercoating on Monday.
I spent 10 hours yesterday working on the brackets. The good news is I can reuse the brackets
so its 4 bolts to bolt on the future upgraded version.
#2 will be tucked in about an inch and a half closer to the bumper. It will also be wider by 4 inches and the base will not be as long. That should even out the weight of 3 pipes X 4" more worth of tubing.
Its very hard keeping it from twisting when you are welding it.
Anyways...enough of the "issues"....This one will be on the car for Mustangfest (but powdercoated black):
Bullitt Member
Joined: September 9, 2009
Posts: 372
Likes: 0
From: Miami
Dam that is so very nice 
Do you have To Enslave and Destroy on the side as well ? Lol
EDIT: LOL you do ! It was To Punish and Enslave lol the fact you have that detail is great
Do you have To Enslave and Destroy on the side as well ? LolEDIT: LOL you do ! It was To Punish and Enslave lol the fact you have that detail is great
Last edited by Ninjak; Sep 28, 2009 at 09:29 AM.
Thread Starter
Cobra R Member
Joined: December 21, 2004
Posts: 1,617
Likes: 3
From: The Alamo
I got the PB back from powdercoating at lunch time. I had cut off 1.5" to snug it in closer to the bumper.
I was very worried about fittment since the holes were already drilled before I cut it again....
but it looks like it came out ok. It was sprinkling on me most of the time
I was working on it and by the end of it I was soaked.
Im very happy with the powdercoating job:
They took my picture as I drove up to Mustangfest 2009. They made Mats from the pix and
it looked good so I bought it...
I was very worried about fittment since the holes were already drilled before I cut it again....
but it looks like it came out ok. It was sprinkling on me most of the time
I was working on it and by the end of it I was soaked.
Im very happy with the powdercoating job:
They took my picture as I drove up to Mustangfest 2009. They made Mats from the pix and
it looked good so I bought it...
Thread Starter
Cobra R Member
Joined: December 21, 2004
Posts: 1,617
Likes: 3
From: The Alamo
It will be at The Rim's- Bass Pro Shop this Sunday in San Antonio.
Come see it.
http://www.samustang.com/2009_carshow.htm
http://www.samustang.com/pdf/2009_Show_Flyer.pdf
Come see it.
http://www.samustang.com/2009_carshow.htm
http://www.samustang.com/pdf/2009_Show_Flyer.pdf
