Kevin: you are definitely "The Man". Many, many thanks for your hard work, long hours and extra effort to keep us informed and to accommodate our needs and demands, for info and products.

This guy is the best, folks. He won't steer you wrong.

 

http://forums.bradbarnett.net/showpo...&postcount=318

 

ok i am tech not a wiz kid - where in this is the torque specs? thanks

 

Index 3 and 4 in the exploded pic. 89 in lbs for the stud and nuts on the throttle body.

 

thanks for the reply; is the 89 in for both the throttle body and the bolts in the back as well - tried looking at the pictures but they are so small i cannot print out - the diagram is out of focus.

 

The pic link doesnt work right in a qoute, try this link http://server4.pictiger.com/img/4008...engcover-1.jpg

But it only shows the front, not the rear.

 

thanks that worked; just so i understand this - i ordered the two part numbers for the bolts and both of these will go into the top and bottom on both sides of the throttle body; what about the two bolts in the back of the engine cover - do i just use the existing ones? and do you have any idea what the torque on these would be? thanks again

 

Here is what you do. Remove the two upper throttle body bolts. Install the Two new Studs in Upper throttle body DO NOT OVERTIGHTEN! Pull off the wiring Snap fit Connetors at the rear of the Intake on the fuel rail studs. Slide the cover over the New Studs in front. Slip the rear of the cover over the Rail Studs. Snap the Wiring Snap fit connectors back on. Install new Nuts on New Studs and you are done!

[img=http://images3.pictiger.com/thumbs/84/65c8eb8ee2bd6ff2ea282df4e820df84.th.jpg] [img=http://images3.pictiger.com/thumbs/a1/54520c846accc39f7d7dc423876316a1.th.jpg] [img=http://images3.pictiger.com/thumbs/54/9111024c7725c054f2c28eb179fbaa54.th.jpg] [img=http://images3.pictiger.com/thumbs/ed/ff948c65869616255848f537644aeaed.th.jpg]
Free Image Hosting - PicTiger

 

Thanks a lot; this makes it easy; i really appreciate your help.

 

You Are Welcome!


kc

 

I just finished Shipping the First batch of Covers and an hour later look what shows up A Pallet o Covers! Gotta Get em OuT!!!!!!!!!!!!
Good Thing I got a Big chunk o Fords Hardware!
I will attempt to ship all of these by weeks End!
The Next Load will be 5 ft Tall!

 

Hey Kev,

Mine came in Friday and looks great. It'll have to be modified to fit around the MRT fuel rail, but so did the Midwest piece.

 

Hows the match to tungsten? Is it going to match my JLT tube a little, kinda, sorta??

 

I didn't compare it to the external paint. It really isn't close from what I remember, but I'll see if I can post a pic later.

 

Mines out for delivery today!!

 

Got mine today!! thanks Kevin!! Hope to get it installed here in a bit!!

 

What not done yet? Wheres the pics? How to you feel it fits color wise to the rest of the compartment?

 

Installed:


While not a perfect match, I like it better than the one I had before. Easy install. I think I will get me a silver decal of some sort for the intake tube......

 

Looks closer to Mineral Grey than Tungsten, but looks good.

 

Thanks for the pics. I wasn't so hard over on a color matching tube so i'll probably go with the black and dress it up with a emblems or something. The engine cover is too cool!