Scott, I did get the pony off the cover, but it was tough. Masking the pony would be tough because of the way it is inset. The pony is stamped thin aluminum with a clear epoxy filler in back for strength. My pony wasn't level when the epoxy hardened, so the feet stuck out higher than the rest of the horse and allowed me to get some dental floss under its legs. It was much harder than removing a GT emblem, though. The glue is rubbery and strong as all get out. I was very careful not to damage or bend the horse, but it did come off. Then I used a dremel to grind down the epoxy level and make the horse fit perfectly. Just considering the glue that Ford used, I used some Shoe Glue (a rubber cement made for repairing tennis shoes) to reattach the horse. (We'll see how it holds up.)
Fastball, I used DupliColor Wheel Coating in Graphite for the cam covers, hoping to match the plenum cover, but it was too dark. I then painted the plenum cover to match and used DupliColor Chrome spray paint, applied with a foam brush to redo the fins and lettering. The colors are great, very metallic, but I'm not sure how they'd go with mineral grey. I't almost a gunmetal color, with no warm tones like mineral. Maybe Ford sells an anthracite paint to touchup its bullit wheels? That might do.

 

Thanks to Kevin C. for great serviced in my purchase of the engine cover and other items!!!

 

Mine does. Did you try flipping the bar around?

 

Has anyone received tracking numbers for the orders KC shipped this weekend?

 

I got my tracking number, part should have left out today. I had a tracking number e-mail on saturday.

 

Not sure if thats a good idea. The passenger side is labeled with a P. Not sure if its advisable to reverse. There is room, but looks less than yours.

 

Since it should be equal from side to side what makes it different in terms of passenger and driver side? I don't know alot about strut braces, but seems to me like it really shouldn't matter, unless it angles back or forward for some reason?

 

Im not sure myself, but you would think there is a reason if they specifically denoted Passenger side.

 

i installed the strange brace also and you just gotta believe they do not designate one side to go on the passenager side for no reason; it is specifically stated in the installation instructions along with the correct torque, 24 or 25 pounds; so a prudent person will read and follow the directions. i dont have any indentations in my liner and it clears the plenum cover.

 

LOL, I didn't even know about the P. Guess I should have read my directions. I just installed the way it looked like it fit best. No rubbing, and the car handles much better, so I'm happy with it. I'm pretty sure I have mine on the correct way, flipping it around makes it rub on the plenum cover firmly.

 

I received my tracking number that night in an email from KC. It was picked up yesterday afternoon and is on it's way!

 

KC, is the man! My cover arrived today and looks great. I feel like I owe him money with all the extra's in the box. Now I just got to get it mounted when the sun goes down. We had a cold front come thru and dropped the temp to 99 degrees.

 

Called KC today and it seems like my Ford Intake Cover did'nt make the weekend shipment. However its going out today and he gave me the tracking number. Thanks KC !!!

 

mine went out on monday and according to tracking I should have it Friday, so I will have something to do when I get home Friday night

 

Recieved mine today! it looks great

 

Ordered mine today, but not from KC (sorry). It should be here end of the week I hope.

 

Dont make any other plans, this mod will take all of 5 minutes tops to install, lol.

 

I got mine today with some other goodies too..it looks awesome

 

OK, I want one....How do I do this?

John.

 

Mr. UPS delivered my cover this afternoon via the "Great" Kevin.

As expected it was in excellent condition and looks great.

I can hardly wait until I can put it on my baby.

Thanks again to Kevin for the TMS arrangement and the great service!!!

RCW