Replace cloth and foam
8/10/13, 08:42 PM
#1
Member
Thread Starter
Join Date: August 10, 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Replace cloth and foam
I have just picked up a 2006 GT with a full set of unfitted factory seat covers and foam inserts.
I can find loads of guides to change the covers but none on the foam.
Does anyone have any tips on this?
Thanks in advance.
I can find loads of guides to change the covers but none on the foam.
Does anyone have any tips on this?
Thanks in advance.
8/10/13, 09:18 PM
#2
Mach 1 Member
Join Date: September 15, 2009
Location: Traverse City MI.
Posts: 679
Likes: 0
Received 2 Likes
on
2 Posts
welcome to the forum. i replaced my bottom foam on the driv side just to save the seat cover from going bad. its not too bad. not sure if this will help but heres some info from when i did it
http://www.allfordmustangs.com/forum...-seat-how.html
http://www.allfordmustangs.com/forum...-seat-how.html
Last edited by amustangrocks; 8/10/13 at 09:23 PM.
8/10/13, 10:14 PM
#3
Member
Thread Starter
Join Date: August 10, 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
welcome to the forum. i replaced my bottom foam on the driv side just to save the seat cover from going bad. its not too bad. not sure if this will help but heres some info from when i did it
http://www.allfordmustangs.com/forum...-seat-how.html
http://www.allfordmustangs.com/forum...-seat-how.html
Really useful, I am after getting as much info as possible before I start ripping bits out.
Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
Rando
2010-2014 Mustang
8
8/25/21 11:12 AM
PonyMuscletang13
2010-2014 Mustang
4
9/29/15 09:40 AM