Stainless Decklid Medallion
10/18/06, 06:54 PM
#2
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
How about this from SHR?
http://www.silverhorseracing.com/web...ategory_id=255
http://www.silverhorseracing.com/web...ategory_id=255
10/24/06, 07:42 PM
#5
Bullitt Member
Join Date: February 8, 2005
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Any new news in regards to the blank rear emblem? I'm thinking about getting a tribar pony from the stock wheels and placing on the blank silverhorse rear emblem. I'm looking forward to seeing what folks come up with for placement on the blank emblem.
10/24/06, 08:41 PM
#6
Cobra Member
Thread Starter
10/27/06, 10:01 AM
#7
Order has been placed to do finishing on 50 pieces to "test the waters" - so I expect that you guys are actually going to buy these !
Given some other work that is taking place at the same time on other projects, I expect to have these in about three weeks. Machining is already done, we just didn't have time to slip them into the schedule for finishing.
Finishes will be black anodized, polished, and chrome plated.
Here's a couple of pictures of the existing ones we have that I just took the other day.
!Given some other work that is taking place at the same time on other projects, I expect to have these in about three weeks. Machining is already done, we just didn't have time to slip them into the schedule for finishing.
Finishes will be black anodized, polished, and chrome plated.
Here's a couple of pictures of the existing ones we have that I just took the other day.
10/27/06, 10:36 AM
#8
Cobra Member
Order has been placed to do finishing on 50 pieces to "test the waters" - so I expect that you guys are actually going to buy these !
Given some other work that is taking place at the same time on other projects, I expect to have these in about three weeks. Machining is already done, we just didn't have time to slip them into the schedule for finishing.
Finishes will be black anodized, polished, and chrome plated.
Here's a couple of pictures of the existing ones we have that I just took the other day.
!Given some other work that is taking place at the same time on other projects, I expect to have these in about three weeks. Machining is already done, we just didn't have time to slip them into the schedule for finishing.
Finishes will be black anodized, polished, and chrome plated.
Here's a couple of pictures of the existing ones we have that I just took the other day.
-danny
10/27/06, 08:26 PM
#10
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
10/27/06, 11:15 PM
#11
What he said.
But, the plain one will be exactly what you are asking for - the GT piece without the GT engraved in it.
That said, our newest toy is really capable of some nice work, wait until we can start to show it off... it's busy right now though doing a high-precision job, so I have to get that one through first, and it will take until almost Christmas (literally) to do that...
Just think though, 25,000+ RPM, and the ability to maneuver a tool only .010 in diameter... That's only about the thickness of 3 sheets of paper to you non-machinist guys out there, and that's the tool !!
But, the plain one will be exactly what you are asking for - the GT piece without the GT engraved in it.
That said, our newest toy is really capable of some nice work, wait until we can start to show it off... it's busy right now though doing a high-precision job, so I have to get that one through first, and it will take until almost Christmas (literally) to do that...
Just think though, 25,000+ RPM, and the ability to maneuver a tool only .010 in diameter... That's only about the thickness of 3 sheets of paper to you non-machinist guys out there, and that's the tool !!
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM
tj@steeda
2015 - 2023 MUSTANG
0
9/10/15 12:44 PM