Removing the fake gas cap?
#1
Team Mustang Source Legacy Member
Thread Starter
I'm thinking of either removing the fake gas cap completely or swapping it for a V6 edition.
Anyone know how it's held on? I assume it's tape like the badges.
Are there any alignment holes like the 99-04 fender emblems?
I know some of the cars at SEMA had them removed.
Anyone here work on one of them?
Jason
Anyone know how it's held on? I assume it's tape like the badges.
Are there any alignment holes like the 99-04 fender emblems?
I know some of the cars at SEMA had them removed.
Anyone here work on one of them?
Jason
#4
Yeah, John from AAI got a V6 'gas cap'...there are 2 holes and its held on with adhesive...the holes look to be about 1/4 or 1/2 inch wide.
Shouldn't be too hard to swap out for one or the other 'caps'
If your handy with metal working, the holes shouldn't be a problem either
Shouldn't be too hard to swap out for one or the other 'caps'
If your handy with metal working, the holes shouldn't be a problem either
#7
I've got a tri-bar mustang from my first 66 - I've thought about putting it on my new 05, but man I hate the thought of drilling the four holes for it. It's smaller than the cap though - I'd probably put it on a front qtr-panel where it was on the 66.
#8
Steeda wants $99.00 for their cap, I can image how much Ford will nail ya if you order 1 for the V6. I'm not going to replace mine. If I did it would be for an aftermarket one, not one from the V6.
#11
Team Mustang Source Legacy Member
Thread Starter
For the aftermarket companies making black out panel, how about making one that allows us to remove the 'cap' completely.
It's just too big IMO.
Jason
It's just too big IMO.
Jason
#14
Team Mustang Source Legacy Member
Thread Starter
Originally posted by kevinb120@November 26, 2004, 1:57 PM
there will be 100 products just covering the rear of the car in the next six months I'm sure.
there will be 100 products just covering the rear of the car in the next six months I'm sure.
Remember the Mach 1 panel?
It had a molded in area for the GT and Ford badges.
You HAD to put them back on there or it looked stupid.
Keeping my fingers crossed.
Jason
#15
Mach 1 Member
Here is the link with the pics:
Fake Gascap medallions
Fake Gascap medallions
#16
Team Mustang Source Legacy Member
Thread Starter
Originally posted by f1-cobra@November 26, 2004, 4:59 PM
Here is the link with the pics:
Fake Gascap medallions
Here is the link with the pics:
Fake Gascap medallions
I got this message:
Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.
The error returned was:
You do not have permission to view this topic
#20
Team Mustang Source Legacy Member
Thread Starter
Any "insiders" know what the aftermarket companies are planning for the black out panel?
Are we going to have the option of leaving off the cap?
Jason
Are we going to have the option of leaving off the cap?
Jason