Ok, I have a 2006 Black GT with a stock spoiler. At first, before I had the car, I hated this spoiler. It has grown on me over the past month I have owned the car. I may just keep it as is, BUT I have paired down the choices that cover the factory holes to two companies. Either the Cervinis, which for some is too big/tall, and I'm not sure if I don't agree with them. I think one has to have a big hood to offset the size and I am planning on getting the Fang Mystery 8 setup when it comes out, so that may work. But I also like the RK Sport rear spoiler. I know people have mentioned they don't like the design of the side part; the way it hugs the corner. But on a black car, I'm not sure this would be a big deal. Black tends to just gobble seams and style lines right up and make it more look like part of the car in comparision to other colors. I like the fact that th RK Sport model bends back toward the top. It still has that ducktail look, but just modified.

I have included some photos of each. One from RK's site and others from a member post

Any votes either way would be appreciated(remember this is on a black Mustang)

 

You know the more I see the RK Sport one, the more I like it - the sides don't bother too much now and on a black car I think you are right about the seams and all that.

Unless you go with a whole kit to 'beef up' the car, I think the Cervinis is too big.

Funny - before I removed mine, I found myself becoming more attached to the stock spoiler than I thought too

Also - if you have a good dealer, you might be able to swap out your decklid, if you wanted to go with one that does not need the stock holes.

(S'what I did)

 

Yea, except unfortunately for dust, dirt and scratches, black hides things well. I was looking at the Roush rear spoiler just as an example of a wing that shows up on the side. That one REALLY goes off the side, although be it more sculpted, and I've seen several with that one. I don't know it there is any member on this site with that RK Sport wing installed. For a long time I have been leaning toward to Cervinis, but at certain angles it does look big. The CDC and SS ones are nice from the side and rear, but when I look at 3/4 side position pictures of them on cars, a part of me thinks they are not big enough for the size of the car. I think of all the appearence mods, the rear spoiler is going to be the hardest choice to make. Well if I get the RK Sport I'll post shots of it. I think I'll be the only one with that wing in here, which scares the ^%$% out of me, as maybe it does look that bad and my "taste-buds" are off.

 

If you're going with the Mystery 8 front end, which is a great choice BTW, why not just get the Fang rear end as well? It would probably cost more, but you'd get a molded in spoiler on a new decklid, and it would be proportioned right for the front. I'll be so jealous when I start seeing members with these on this site.

My SS spoiler is very subtle, looks almost factory stock, and doesn't cover the holes, but I really like it! I ordered "spoiler-delete" just so I could get one. Good Luck.

 

I'd go with the RK sport one. It just seems what a spoiler should look like. The Cervinis just seems to big.

 

I looked into the Fang integrated decklid/spoiler, but I so absolutely love that big, chrome GT lock in the back that I couldn't part with it. Funny, I can part with the factory spoiler, but I can't mess with that chrome, center emblem. It just really looks like it belongs there with the style of the car. I know it's just a physically small part of the car, but it has so much style and heritage and it plays the part so well.

 

That RK one is hot, my dad wants a ducktail for his white GT, I'll talk him into that one

 

I've been looking at spoiler for a while now (can't decide on which), but if you like the look of the RK spoiler (minus the sides) you should look into the upcoming spoiler from Unique Performance. There producing the parts for the foose stallion.







It looks like it covers the factory holes (maybe uses them to mount) and curves the ends more instead of square like the Rk one.

 

Even though I have the Cervini's ducktail and like it, I'd agree that it would look a bit tall by itself. You really need the side exhaut kit's rear valance to make the back end bigger to make it look proportional to the rest of the car.

However, I don't care for any other spoiler. The only ones I like are the ducktails, and I wouldn't trade my Cervini one for any of the others out othere.

 

NICE FIND Jose! That's another option, very cool!

I agree with you Bradly, the Cervinis is perfect if you have their's or some other companies body kit. By itself, it may be too much for some.

 

From the rear the Cervini is the very best looking rear ducktail out there.

 

I dont like the whoosh at the bottom of the cervinis. I like the new one on the Foose car, but out of all of them, I like the SSE one the best.

 

I'd go with the Legend rear spoiler, IMO.

GEFRACING.COM

 

My 05 GT is black also and I switched the stock wing out for a Roush Spoiler.


[attachmentid=43997]


Sorry Pic is a little over exposed.

 

I personally vote for the RKSPort spoiler... I think it would look best on a black car because of the side pieces. I still think the Cervini ducktail is too tall.

 

This looks awesome from the side and front - but from the back..... the ends are just too short.... looks unfinished

 

I'd be interested in the Foose Grille (but with a Tri-bar pony)

 

If you want that grille, check out Cervini's. They have a billet grille that fits the stock bumper. It actually comes with a running pony emblem as well.

 

What about 3D Carbon's versuon that covers the factory holes.

Here's a topic with pictures.

hags1