That would be...weird.

 

Thanks, this is my favorite rear photo, but with the old tail lights unfortunately.

 

take another one with them fatties!!

 

Have already started my Winter build and the front of the car has a gaping hole waiting for a new AFCO radiator to be shoehorned in. Picture with new tail lights and "fatties" will have to wait until next spring.

 

Dang sir that stinks

 

Got'em!

 

looks great

 

Very nice with the yellow and SHR panel!

 

Yes, I agree.

 

Congrats they Look great on a yellow Stang

 

@ anyone who has these in their hands and has not yet installed them. Can you post some pictures of the wiring harness on them and also where the control module is located? I currently have Web-Electric sequentials on my '07 and I did the recommended mod to make them not sequence when you step on the brakes. I have seen these Gen5s in video and it is obvious that the control module is triggered by the brake light voltage. I'm trying to see if the trigger input is spliced into the brake wire before or after going into the control module. The mod I speak of requires tapping into the hot wires going to the front left and right turn signals and using those voltages as the trigger for the left and right rear modules respectively. No turn signal, no trigger, but the brake light voltage goes through the module and all lamps light as one.
BB