Ok, I'm ready to buy some deep dish bullits, but I'm worried about the quality of the ones I see on sites like Mustang Tuning, Partshopper, Wheel Replicas and the like. For all of you who have these rims, can you vouch for them? Are they good? How is the Chrome? I went to the local tire store today and he showed me some from a company called "OE Creations", but they don't seem to make a deep dish version of the 18x10's and 9's. So, I think I'm going to go the internet route. There seems to be two or three different manufacturers of these out depending on whose site you go on. Thanks for the input...........

 

I am really happy with mine. The finish is great, they balanced really well and seem to be holding up good. They weigh less than the stock bullitts and are priced right...

 

Agreed, I bought mine because of VegasJay's car. They are awesome rims.

Sean

 

Bullitts from Mustang Tuning are top notch!!

 

I want to oder this rims, looks awesome, but in my country the wheels can not go out of the body, it's illegal... :bang:

Anyone have close pics of the 18x9/18x10 pack and "rear/side" view to see how they fits with the body's edge?

Thanks guys!

 

I have 9.5 all around (Steeda) and they don't stick out, I think you should be fine.

Hopefully somebody will post a few pictures.

 

My Mustang Tuning wheels are 18"x9" all the way around. The tires are 255/45/18's on the front and 285/40/18's on the rear. As you can see they don't "stick" out, you should be fine in Switzerland even with 18"x10"s on the rear.

 

Thanks!
I think the 18x10 will be too much for me...unfortunately

 

I have the MustangTuning combo 18x10/18x9, They do not stick out or rub at all. Tires are in my sig.
Here are some pics I posted awhile back.
http://forums.bradbarnett.net/index.php?sh...hl=deep+bullets

 

I think I have a 18x9/x10 combo to order!!!
Thanks Bret!

 

Here's a pic of 18x10's on the rear, they do not stick out from the body.

[attachmentid=42398]

 

Cool photos everybody. I'm not worried anymore about the quality. So many have bought from them and others who make a similar rim. I spoke with one of the several companies that sell these bullitts and he mentioned that by the end of the 1st quarter, he will have a staggered setup ready. That new molds are in the process right now. So, for those waiting for a staggered setup consisting of the regular 18x9 in the front and 18x10 deep dish in the back, you have a little less than 3 months to wait.