Nice pics as always Bill, looks great!

 

I got mine. Very nice pieces. I did however order the GT emblems and received the 4.6 Emblems so I called them and they are making me a GT set at a reduce cost and I'll put these on my wife's car when the others come..Nice work Midwest Auto Gear.

 

I ordered my shock tower & radiator covers on the 3rd and they emailed me they were shipping on the 13th so I called today and their painting them today and shipping Monday. Even though I'm not in a hurry I hate waiting!

 

the strut tower covers, do not see where on their site...

 

Here's the link to order them.
http://www.midwestautogear.com/index...=49&Itemid=104

BTW-Here's a link to pics of my tower covers. I got the 1st set of tower covers in the US.
http://forums.bradbarnett.net/showpo...4&postcount=35

 

Those are tight, Ive got the mirror covers, guess I need to add those.

 

I popped the hood after having them on for several weeks, and noticed the driver side one had popped off? Did notice when installing them, that this one in particular had a lot more movement side to side than that of the passenger. Anyone else have this issue? I also inspecected the underside, and notthing looks to be broken.

Thanks

 

these are another nice offering from Midwest, Radiator cover extensions.

 

I agree, already another post on the radiator extensions.

http://forums.bradbarnett.net/showth...t=61782&page=3

 

I guess everyone that has this product , both sides fit tight with no issues similiar to mine? I'll take this up with MWAG.

Thanks

 

My passenger side fits looser than the drivers side. I attribute this due to the center strut stud isn't quite centered on the passenger side from the time I did my lowering spring install. I mean it's barely off center, but enough to make snapping the cover on a bit difficult.

As the front suspension moves, so does that center strut stud. If off center, it will pop off as you drive. If yours are dead center, examine the 4 retaining clips to see if one is bent too far in (or damaged) and not engaging the hole cut-out.

 

Valid points, will investigate.


Thanks