Lower Grille for our CS's
Thank you for the pics.
Mach 1 Member
Joined: July 22, 2007
Posts: 704
Likes: 1
From: "SW" Iowa
Home Run!!
Now thats what I'm talking about!! Love it!! Can't wait for this wonderful/correct looking new grill piece to go into production from SHR. IMHO.What FoMoCo should have done from the get go!! Thanks Marcello!! You guys have killed it!! Home Run!! The plastic is at the ready! 
CalStang
CalStang
Last edited by CalStang'07; Aug 8, 2008 at 06:23 AM.
Legacy Tms Member
Joined: January 9, 2005
Posts: 2,037
Likes: 2
Steve,
There's no pony in our part... that was someone making a similar piece as a one off from an existing grill (which came out nice, even though I agree on the pony part as redundant).
Everyone else, we're working on it! The honeycomb pattern spacing was critical to avoid a section where you'd otherwise get "diamonds" at the ends of the piece visually - something I wanted to avoid to help aid in the OEM look - or more to the point the should've been OEM look
There's no pony in our part... that was someone making a similar piece as a one off from an existing grill (which came out nice, even though I agree on the pony part as redundant).
Everyone else, we're working on it! The honeycomb pattern spacing was critical to avoid a section where you'd otherwise get "diamonds" at the ends of the piece visually - something I wanted to avoid to help aid in the OEM look - or more to the point the should've been OEM look
Team Mustang Source
Joined: February 14, 2004
Posts: 467
Likes: 0
From: East Coast
Steve,
There's no pony in our part... that was someone making a similar piece as a one off from an existing grill (which came out nice, even though I agree on the pony part as redundant).
Everyone else, we're working on it! The honeycomb pattern spacing was critical to avoid a section where you'd otherwise get "diamonds" at the ends of the piece visually - something I wanted to avoid to help aid in the OEM look - or more to the point the should've been OEM look
There's no pony in our part... that was someone making a similar piece as a one off from an existing grill (which came out nice, even though I agree on the pony part as redundant).
Everyone else, we're working on it! The honeycomb pattern spacing was critical to avoid a section where you'd otherwise get "diamonds" at the ends of the piece visually - something I wanted to avoid to help aid in the OEM look - or more to the point the should've been OEM look
Bullitt Member
Joined: August 5, 2007
Posts: 235
Likes: 0
From: KC MO
Steve,
There's no pony in our part... that was someone making a similar piece as a one off from an existing grill (which came out nice, even though I agree on the pony part as redundant).
Everyone else, we're working on it! The honeycomb pattern spacing was critical to avoid a section where you'd otherwise get "diamonds" at the ends of the piece visually - something I wanted to avoid to help aid in the OEM look - or more to the point the should've been OEM look
There's no pony in our part... that was someone making a similar piece as a one off from an existing grill (which came out nice, even though I agree on the pony part as redundant).
Everyone else, we're working on it! The honeycomb pattern spacing was critical to avoid a section where you'd otherwise get "diamonds" at the ends of the piece visually - something I wanted to avoid to help aid in the OEM look - or more to the point the should've been OEM look
Legacy Tms Member
Joined: January 9, 2005
Posts: 2,037
Likes: 2
We're close to at least doing a list of customers to contact, but not quite yet...
Tool is in production now.
Agent 47 Brake Duct Kit for the GT/CS / Shelby GT WILL interface with our lower insert, and while visually it may not be as "smooth" as I would like (the brake ducts come far forward from the grill area) the FUNCTION of a layout like this would be 100% with zero bling-age
Tool is in production now.
Agent 47 Brake Duct Kit for the GT/CS / Shelby GT WILL interface with our lower insert, and while visually it may not be as "smooth" as I would like (the brake ducts come far forward from the grill area) the FUNCTION of a layout like this would be 100% with zero bling-age
Legacy Tms Member
Joined: January 9, 2005
Posts: 2,037
Likes: 2
Well, we just got bored with that idea, so we forgot about it...
Just kidding !!
We've been getting racked by storms here (the news where Fay sat and dumped 2 ft. of rain - that was us ) and the flooding has put some things behind a little, but we're still hopeful to have the tool producing this month, although it may be later in the month rather than sooner.
Pins have arrived, material is already ordered for the main run, and tool is about 60% complete.
Price for the piece is going to start at 89.00. If demand is high, we will be able to hold that price for everyone.
As to pre-orders, we're getting a list together via phone, and will call everyone on it when we have them in-stock and ready to ship. Trying to avoid a pre-order mess with other products because of the resulting backorder / shipping mess it can create.
Just kidding !!
We've been getting racked by storms here (the news where Fay sat and dumped 2 ft. of rain - that was us
) and the flooding has put some things behind a little, but we're still hopeful to have the tool producing this month, although it may be later in the month rather than sooner.Pins have arrived, material is already ordered for the main run, and tool is about 60% complete.
Price for the piece is going to start at 89.00. If demand is high, we will be able to hold that price for everyone.
As to pre-orders, we're getting a list together via phone, and will call everyone on it when we have them in-stock and ready to ship. Trying to avoid a pre-order mess with other products because of the resulting backorder / shipping mess it can create.
Team Mustang Source
Joined: June 19, 2004
Posts: 6,840
Likes: 2
From: Phoenixville, PA
Well, we just got bored with that idea, so we forgot about it...
Just kidding !!
We've been getting racked by storms here (the news where Fay sat and dumped 2 ft. of rain - that was us ) and the flooding has put some things behind a little, but we're still hopeful to have the tool producing this month, although it may be later in the month rather than sooner.
Pins have arrived, material is already ordered for the main run, and tool is about 60% complete.
Price for the piece is going to start at 89.00. If demand is high, we will be able to hold that price for everyone.
As to pre-orders, we're getting a list together via phone, and will call everyone on it when we have them in-stock and ready to ship. Trying to avoid a pre-order mess with other products because of the resulting backorder / shipping mess it can create.
Just kidding !!
We've been getting racked by storms here (the news where Fay sat and dumped 2 ft. of rain - that was us
) and the flooding has put some things behind a little, but we're still hopeful to have the tool producing this month, although it may be later in the month rather than sooner.Pins have arrived, material is already ordered for the main run, and tool is about 60% complete.
Price for the piece is going to start at 89.00. If demand is high, we will be able to hold that price for everyone.
As to pre-orders, we're getting a list together via phone, and will call everyone on it when we have them in-stock and ready to ship. Trying to avoid a pre-order mess with other products because of the resulting backorder / shipping mess it can create.
Legacy Tms Member
Joined: January 9, 2005
Posts: 2,037
Likes: 2
Just depends on when in November. Our entire office staff will be at SEMA this year from Nov 4-9, but we'll be back open on the 10th. So long as it isn't that week, then definitely come on by and check out our new shop, we're finally settled in and have it going day-to-day like the normal disaster we are used to!!!
