Converting DRL's to Bi-Xenon
#1
Bullitt Member
Thread Starter
Join Date: July 14, 2006
Location: Ottawa, Canada
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Converting DRL's to Bi-Xenon
Anyone converted their Daytime Running Lights (Canadian stangs) to bi-xenons. Interested in finding out how (did you convert turn signals to DRL's?) and how it worked out.
Thx.
Thx.
#2
I had a Xenon setup working with the DRLs on my canadian stang. I had capacitors wired into the harness so that the lights didn't flicker when the DRLs were on. I'm sure this would also work with a bi-xenon setup.
#3
Bullitt Member
Thread Starter
Join Date: July 14, 2006
Location: Ottawa, Canada
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
#4
The DRLs worked exactly like stock. Basically the hid lights were on whether or not the light switch was on or off.
I beleive they were 4700uf capacitors, one on each side wired into the low beam connections. A friend of mine did the wiring so I'm not completely sure how they were connected.
I beleive they were 4700uf capacitors, one on each side wired into the low beam connections. A friend of mine did the wiring so I'm not completely sure how they were connected.
Thread
Thread Starter
Forum
Replies
Last Post