Procharger Pics
#2
Thats freakin Sick Rick!! LOL!! Good job my brotha!!
If you need any help, FlapJack is the man! I would support you attempting theinstall yourself, especially since you can give FlapJack a phone call if you have any problems..
I can also understand the feeling where you dont want to get the car hung up at your house if you feel at some point you cant continue on your own..
Do what you feel is best for you man.. I am just darn happy you got it..
There gonna call us Team Centrifugal!! LOL! We are gonna need all the help we can get to hold off the Turbo's!
In the V6 world, Vortech and Procharger have teamed up to go after the Mighty Powerhouse Turbo! LOL!
That intercooler looks sweet also Rick.. I just swapped out my air to air intercooler back for my air to water Aftercooler.. This is because since I now have the Water/Meth injection, I am covered in terms of keeping the boost kool..
With the intercooler, I needed to upgrade my pipes to 3" because I was loosing about 1 psi of boost.. Thats really not necessary.. So I reverted back to the basics, and now have 12.5PSI without the METH, and will have about 14.5PSI while using METH..
I might install the 2.87in pulley, which will place me @ 11.5psi without the METH, and 13.5PSI with the METH.. But we will see.. I am going to spin the 2.62in pulley atleast once on the dyno and see if it starts to go towards 14.psi.. If so, we will stop and place the 2.87in pulley on and do a full pull to 13.5psi with about +16 degrees of timing..
My goal is about 435RWHP.. I shouldnt have a problem.. I just hope I can keep it together.. LOL!!
Good Luck Rick! May the Force be with you.. I mean Boost! LOL!!
If you need any help, FlapJack is the man! I would support you attempting theinstall yourself, especially since you can give FlapJack a phone call if you have any problems..
I can also understand the feeling where you dont want to get the car hung up at your house if you feel at some point you cant continue on your own..
Do what you feel is best for you man.. I am just darn happy you got it..
There gonna call us Team Centrifugal!! LOL! We are gonna need all the help we can get to hold off the Turbo's!
In the V6 world, Vortech and Procharger have teamed up to go after the Mighty Powerhouse Turbo! LOL!
That intercooler looks sweet also Rick.. I just swapped out my air to air intercooler back for my air to water Aftercooler.. This is because since I now have the Water/Meth injection, I am covered in terms of keeping the boost kool..
With the intercooler, I needed to upgrade my pipes to 3" because I was loosing about 1 psi of boost.. Thats really not necessary.. So I reverted back to the basics, and now have 12.5PSI without the METH, and will have about 14.5PSI while using METH..
I might install the 2.87in pulley, which will place me @ 11.5psi without the METH, and 13.5PSI with the METH.. But we will see.. I am going to spin the 2.62in pulley atleast once on the dyno and see if it starts to go towards 14.psi.. If so, we will stop and place the 2.87in pulley on and do a full pull to 13.5psi with about +16 degrees of timing..
My goal is about 435RWHP.. I shouldnt have a problem.. I just hope I can keep it together.. LOL!!
Good Luck Rick! May the Force be with you.. I mean Boost! LOL!!
Thread
Thread Starter
Forum
Replies
Last Post