My automatic hits 200RRWHP N/A!
1/27/06, 08:02 PM
#1
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Ok... I called Lidio today and told him I need an emergency dyno session! As I mentioned last night I could have sworn the new MRT axle back seemed to make a difference in the higher RPMs... Well, Lidio managed to work me in this afternoon!
So Lidio walks into the dyno bay... (the cars already strapped down) He starts the car up and says "WOW!" hehehehe... We made a couple of pulls while the car was still hot from my 90 minute drive... then we let the car cool down for about 20 minutes... I get my camcorder out... and Lidio makes the pull... The results..... drumroll please!!!
Peak HP: 200.8
Peak TQ: 229
Woohoo!!!! The 194 curse is broken!!! Thank you, Scott!!! Even hot the car was at 197... The MRT single Axle back has given me a good 7RWHP gain and it even increased my Torque!!!! Double WOOHOO!!
Now take a close look at the graph.. there is 7RWHP gain at peak... but look a gain in the 5500 to 6000 RPM range... my car is shifting at abotu 5800 to 5900... so it will be taking advantage of the gain.. which is over 10RWHP at these RPMS! These gains are over my Magnaflow! Lidio was absolutely amazed! He laughed and said "if your butt dyno says the gain is there and my dyno says the gain is there...well, then the gain is there!"
Here's todays sheet (vs the Magnaflow from last month)
here a video of the dyno pull (10MB)
Dyno Video
I'll try and get a good drive by video (weather permitting)
So Lidio walks into the dyno bay... (the cars already strapped down) He starts the car up and says "WOW!" hehehehe... We made a couple of pulls while the car was still hot from my 90 minute drive... then we let the car cool down for about 20 minutes... I get my camcorder out... and Lidio makes the pull... The results..... drumroll please!!!
Peak HP: 200.8
Peak TQ: 229
Woohoo!!!! The 194 curse is broken!!! Thank you, Scott!!! Even hot the car was at 197... The MRT single Axle back has given me a good 7RWHP gain and it even increased my Torque!!!! Double WOOHOO!!
Now take a close look at the graph.. there is 7RWHP gain at peak... but look a gain in the 5500 to 6000 RPM range... my car is shifting at abotu 5800 to 5900... so it will be taking advantage of the gain.. which is over 10RWHP at these RPMS! These gains are over my Magnaflow! Lidio was absolutely amazed! He laughed and said "if your butt dyno says the gain is there and my dyno says the gain is there...well, then the gain is there!"
Here's todays sheet (vs the Magnaflow from last month)
here a video of the dyno pull (10MB)
Dyno Video
I'll try and get a good drive by video (weather permitting)
1/27/06, 08:05 PM
#2
Member
Join Date: January 26, 2006
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by scrming@January 27, 2006, 8:05 PM
Ok... I called Lidio today and told him I need an emergency dyno session! As I mentioned last night I could have sworn the new MRT axle back seemed to make a difference in the higher RPMs... Well, Lidio managed to work me in this afternoon!
So Lidio walks into the dyno bay... (the cars already strapped down) He starts the car up and says "WOW!" hehehehe... We made a couple of pulls while the car was still hot from my 90 minute drive... then we let the car cool down for about 20 minutes... I get my camcorder out... and Lidio makes the pull... The results..... drumroll please!!!
Peak HP: 200.8
Peak TQ: 229
Woohoo!!!! The 194 curse is broken!!! Thank you, Scott!!! Even hot the car was at 197... The MRT single Axle back has given me a good 7RWHP gain and it even increased my Torque!!!! Double WOOHOO!!
Now take a close look at the graph.. there is 7RWHP gain at peak... but look a gain in the 5500 to 6000 RPM range... my car is shifting at abotu 5800 to 5900... so it will be taking advantage of the gain.. which is over 10RWHP at these RPMS! These gains are over my Magnaflow! Lidio was absolutely amazed! He laughed and said "if your butt dyno says the gain is there and my dyno says the gain is there...well, then the gain is there!"
Here's todays sheet (vs the Magnaflow from last month)
here a video of the dyno pull (10MB)
Dyno Video
I'll try and get a good drive by video (weather permitting)
Ok... I called Lidio today and told him I need an emergency dyno session! As I mentioned last night I could have sworn the new MRT axle back seemed to make a difference in the higher RPMs... Well, Lidio managed to work me in this afternoon!
So Lidio walks into the dyno bay... (the cars already strapped down) He starts the car up and says "WOW!" hehehehe... We made a couple of pulls while the car was still hot from my 90 minute drive... then we let the car cool down for about 20 minutes... I get my camcorder out... and Lidio makes the pull... The results..... drumroll please!!!
Peak HP: 200.8
Peak TQ: 229
Woohoo!!!! The 194 curse is broken!!! Thank you, Scott!!! Even hot the car was at 197... The MRT single Axle back has given me a good 7RWHP gain and it even increased my Torque!!!! Double WOOHOO!!
Now take a close look at the graph.. there is 7RWHP gain at peak... but look a gain in the 5500 to 6000 RPM range... my car is shifting at abotu 5800 to 5900... so it will be taking advantage of the gain.. which is over 10RWHP at these RPMS! These gains are over my Magnaflow! Lidio was absolutely amazed! He laughed and said "if your butt dyno says the gain is there and my dyno says the gain is there...well, then the gain is there!"
Here's todays sheet (vs the Magnaflow from last month)
here a video of the dyno pull (10MB)
Dyno Video
I'll try and get a good drive by video (weather permitting)
How much HP is that at the fly wheel? ~240HP?
1/27/06, 08:08 PM
#3
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SPARTAN VI@January 27, 2006, 10:08 PM
Congratulations scming!
How much HP is that at the fly wheel? ~240HP?
Congratulations scming!
How much HP is that at the fly wheel? ~240HP?
1/27/06, 08:13 PM
#4
Bullitt Member
Join Date: September 18, 2005
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Wooohoo! Way cool man...
Now, are SURE all the gain is from the exhaust and NOT the louvers? Did you do a before/after with the louvers? That's a variable that you didn't control in your experiment. I want to see numbers!! LOL.
Maybe tomorrow eve I can share a dyno sheet...
Congrats on breaking the 200 threshold!!
Now, are SURE all the gain is from the exhaust and NOT the louvers? Did you do a before/after with the louvers? That's a variable that you didn't control in your experiment. I want to see numbers!! LOL.
Maybe tomorrow eve I can share a dyno sheet...
Congrats on breaking the 200 threshold!!
1/27/06, 08:28 PM
#7
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Excepcion13@January 27, 2006, 10:25 PM
Congratulations, John! Glad to see you back in the game!!! I knew you couldn't give up THAT easily!
BTW, you're probably 250+ at the crank.
Congratulations, John! Glad to see you back in the game!!! I knew you couldn't give up THAT easily!
BTW, you're probably 250+ at the crank.
1/27/06, 08:31 PM
#8
Well well well I must say, I am extreemly impressed John. Congratulations and job well done!!!
You are a pioneer, an auto to break 200 RWHP SAE. You have given me something to work towards.
This is just so friggin awesome.
You are a pioneer, an auto to break 200 RWHP SAE. You have given me something to work towards.
This is just so friggin awesome.
1/27/06, 08:37 PM
#9
Originally posted by scrming@January 27, 2006, 10:31 PM
Thanks... I assume you're talking about my post on stangnet where I said i was done... I was kidding of course... I though I would have got more flak for that one! LOL!
Thanks... I assume you're talking about my post on stangnet where I said i was done... I was kidding of course... I though I would have got more flak for that one! LOL!
I'm still speechless, you broke 200. This is earth shattering for us Autos!
1/27/06, 08:44 PM
#11
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rygenstormlocke@January 27, 2006, 10:34 PM
Well well well I must say, I am extreemly impressed John. Congratulations and job well done!!!
You are a pioneer, an auto to break 200 RWHP SAE. You have given me something to work towards.
This is just so friggin awesome.
Well well well I must say, I am extreemly impressed John. Congratulations and job well done!!!
You are a pioneer, an auto to break 200 RWHP SAE. You have given me something to work towards.
This is just so friggin awesome.
1/27/06, 08:44 PM
#12
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rygenstormlocke@January 27, 2006, 10:40 PM
I never believed you when you said you were done! I should have bet money on this. LOL.
I'm still speechless, you broke 200. This is earth shattering for us Autos!
I never believed you when you said you were done! I should have bet money on this. LOL.
I'm still speechless, you broke 200. This is earth shattering for us Autos!
1/27/06, 08:48 PM
#13
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ManEHawke@January 27, 2006, 10:45 PM
That is impressive with only those mods w/o power adders.
You do the pulls with 89 octane right?
That is impressive with only those mods w/o power adders.
You do the pulls with 89 octane right?
1/27/06, 10:03 PM
#14
Cobra R Member
Join Date: September 21, 2004
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
Wow, im definately getting this muffler now, that just sold me on it.
Wonder if i can get 10rwhp gain out of this over stock? Maybe ill have to spend the money and do a before and after dyno
Wonder if i can get 10rwhp gain out of this over stock? Maybe ill have to spend the money and do a before and after dyno
1/27/06, 10:09 PM
#15
Cobra Member
Thread Starter
Join Date: July 28, 2005
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Fazm@January 28, 2006, 12:06 AM
Wow, im definately getting this muffler now, that just sold me on it.
Wonder if i can get 10rwhp gain out of this over stock? Maybe ill have to spend the money and do a before and after dyno
Wow, im definately getting this muffler now, that just sold me on it.
Wonder if i can get 10rwhp gain out of this over stock? Maybe ill have to spend the money and do a before and after dyno
1/27/06, 10:11 PM
#16
Cobra R Member
Join Date: September 21, 2004
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
I think we need to make a group buy thread for this one. Maybe like 10-15% off? You should talk to him john, see what ya can hook us all up with. Ill be down to buy this week if they can do that 
1/27/06, 10:37 PM
#17
Member
Join Date: May 24, 2005
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Fazm@January 27, 2006, 9:14 PM
I think we need to make a group buy thread for this one. Maybe like 10-15% off? You should talk to him john, see what ya can hook us all up with. Ill be down to buy this week if they can do that
I think we need to make a group buy thread for this one. Maybe like 10-15% off? You should talk to him john, see what ya can hook us all up with. Ill be down to buy this week if they can do that
I would be down for that! Sign me up!
