WMS INTAKE TUNING NOW SHIPPING DYNO RESULTS HERE
#21
Originally posted by 05STG1@September 6, 2005, 6:50 PM
lyin'King, U looking to start trouble![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
I hope my gains are that common....or something.One could hope...
lyin'King, U looking to start trouble
![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
I hope my gains are that common....or something.One could hope...
I'm hopeful that Brent will sell his tune for the WMS and X-2 separately from his kits.
I posed the question and he responded asking for a day to think about it but that was last week.
#25
Originally posted by Mongoose@September 11, 2005, 7:39 PM
He will sell you anything to make a buck. C&L and JLT continue to be the best ( tested) out there. Might as well face the facts.
He will sell you anything to make a buck. C&L and JLT continue to be the best ( tested) out there. Might as well face the facts.
![Lol](https://themustangsource.com/forums/images/smilies/lol.gif)
They definitely have more R&D time put into tuning them
![04](https://themustangsource.com/forums/images/smilies/04.gif)
#26
Originally posted by GOFISCH@September 11, 2005, 11:03 AM
Brent, have you received the tray yet? Any updates?
Brent, have you received the tray yet? Any updates?
![04](https://themustangsource.com/forums/images/smilies/04.gif)
#27
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: March 4, 2005
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
![](http://www.brenspeed.com/cl.jpg)
#29
Originally posted by GOFISCH@September 17, 2005, 2:39 PM
Sorry, I was under the impression you would retest with the WMS Tray installed. But I just read through this again.
Sorry, I was under the impression you would retest with the WMS Tray installed. But I just read through this again.
![Dunno](https://themustangsource.com/forums/images/smilies/dunno.gif)
#31
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: March 4, 2005
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by The Lyin' King@September 19, 2005, 12:33 PM
GOFISCH . . . . was that a "no" as in no testing with the tray and no more tuning efforts then
?
GOFISCH . . . . was that a "no" as in no testing with the tray and no more tuning efforts then
![Dunno](https://themustangsource.com/forums/images/smilies/dunno.gif)
![](http://www.brenspeed.com/xcal2.jpg)
#32
I thought we would get some new numbers with the tray installed. Then I reread and you said it probable wouldn't make any difference. I was looking for numbers with the tray installed. Thanks
#33
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: March 4, 2005
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GOFISCH@September 19, 2005, 4:01 PM
I thought we would get some new numbers with the tray installed. Then I reread and you said it probable wouldn't make any difference. I was looking for numbers with the tray installed. Thanks
I thought we would get some new numbers with the tray installed. Then I reread and you said it probable wouldn't make any difference. I was looking for numbers with the tray installed. Thanks
![](http://www.brenspeed.com/cl.jpg)
#34
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: March 4, 2005
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GOFISCH@September 19, 2005, 4:01 PM
I thought we would get some new numbers with the tray installed. Then I reread and you said it probable wouldn't make any difference. I was looking for numbers with the tray installed. Thanks
I thought we would get some new numbers with the tray installed. Then I reread and you said it probable wouldn't make any difference. I was looking for numbers with the tray installed. Thanks
![](http://www.brenspeed.com/cl.jpg)
#35
Brent,
One member tried to dyno before he got the tray and was getting so much heat (inlet temp) from the engine compartment and fan wash that they aborted the tune attempt.
Some of us were hoping that the HP/TQ numbers would come up tuning with the tray installed as it would tend to isolate the filter from the heat.
One member tried to dyno before he got the tray and was getting so much heat (inlet temp) from the engine compartment and fan wash that they aborted the tune attempt.
Some of us were hoping that the HP/TQ numbers would come up tuning with the tray installed as it would tend to isolate the filter from the heat.
#36
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: March 4, 2005
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by The Lyin' King@September 19, 2005, 4:49 PM
Brent,
One member tried to dyno before he got the tray and was getting so much heat (inlet temp) from the engine compartment and fan wash that they aborted the tune attempt.
Some of us were hoping that the HP/TQ numbers would come up tuning with the tray installed as it would tend to isolate the filter from the heat.
Brent,
One member tried to dyno before he got the tray and was getting so much heat (inlet temp) from the engine compartment and fan wash that they aborted the tune attempt.
Some of us were hoping that the HP/TQ numbers would come up tuning with the tray installed as it would tend to isolate the filter from the heat.
![](http://www.brenspeed.com/cl.jpg)
#37
Originally posted by BRENSPEED@September 19, 2005, 6:13 PM
I logged all my pulls and I did not get that type of heat or much heat at all that would make a big difference in power. I also had zero issues with fan wash. There are some HUGE fans on the dyno for cooling which also caused no fan wash issue. Most tuners have big fans on the dyno. Maybe his hood was closed on the dyno I dont know or maybe he was pulling with a super hot engine.
![](http://www.brenspeed.com/cl.jpg)
I logged all my pulls and I did not get that type of heat or much heat at all that would make a big difference in power. I also had zero issues with fan wash. There are some HUGE fans on the dyno for cooling which also caused no fan wash issue. Most tuners have big fans on the dyno. Maybe his hood was closed on the dyno I dont know or maybe he was pulling with a super hot engine.
![](http://www.brenspeed.com/cl.jpg)
Thanks for the clarification Brent!
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/1/15 01:19 PM