Steeda lightweight rad support
#1
Bullitt Member
Thread Starter
Join Date: April 16, 2006
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Steeda lightweight rad support
I asked about this on another forum and got answers to some weight issues but does anyone have any input on whether this brace would be strong enough to use with the front swaybar in a road coarse environment?
http://www.steeda.com/products/light...pport_s197.php
Figure the stock piece weighs 16 pounds so by Steeda information (1/2 the weight of stock) it must weigh about 8 pounds and you can use the front sway bar.
The BMR support weighs in at only 5.5 pounds but the front swaybar is eliminated. That means a lot more for drag racing when you also subtract the 10 or so pounds for no-swaybar.
http://www.steeda.com/products/light...pport_s197.php
Figure the stock piece weighs 16 pounds so by Steeda information (1/2 the weight of stock) it must weigh about 8 pounds and you can use the front sway bar.
The BMR support weighs in at only 5.5 pounds but the front swaybar is eliminated. That means a lot more for drag racing when you also subtract the 10 or so pounds for no-swaybar.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM
tj@steeda
2015 - 2023 MUSTANG
0
9/16/15 06:44 PM