Shaker Hood vs Car Wash
#1
Team Mustang Source
Thread Starter
Shaker Hood vs Car Wash
Has anyone with the shaker hood run their car through a car wash? We have a touchless car wash here that I have used in the past and was wondering if the amount of water flowing over the hood would be greater than the shaker shroud can elimate?
#2
Legacy TMS Member
Rich, I never took mine through a automated wash but I did hose the heck out of it with the manual car washes and drove it (occasionally) through pounding rain..... worse case I ever had was water spots on the engine.
#3
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
I have the CDC shaker and I do take mine thru an automatic car wash with like 150mph air blow off with no issues. The worst thing that happens is you will get some water spoting on the CDC shaker cover that easily wipes off. I use BP here in Ohio.
Scott
#5
Tasca Super Boss 429 Member
Join Date: November 14, 2007
Location: Pacific NW USA
Posts: 3,652
Likes: 0
Received 8 Likes
on
6 Posts
I had a factory Shaker on my 03 Mach 1 and drove it through an automated cloth car cash twice a week for 3 years without a problem. They were overengineered from the factory to survive torrential downpours, so a carwash is well within its capability to withstand.
#9
Team Mustang Source
Thread Starter
Yeah for $23 I need to get off my butt and wash it myself. I don't mind washing the car but I HATE cleaning the interior and especially that back window.
#10
#13
Bullitt Member
Join Date: December 30, 2007
Location: Lemont
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
How many of you go though cloth car washes, I've only heard how bad they are on a car. We have a couple really nice ones here, but I'm leery to use them. I used them on my old car and never had a problem and it was black, I did have micro swirls but after 100,000 miles I expect that, other then that (Which you really had to look for) the paint was great.
#18
water wond hurt anything going into the shaker...
it will fall into the stock airbox (if it makes it that far) and drain out the bottom of it...
there is a drain in the ducting on the shaker too....
i had it apart last weekend to trim it
it will fall into the stock airbox (if it makes it that far) and drain out the bottom of it...
there is a drain in the ducting on the shaker too....
i had it apart last weekend to trim it
Thread
Thread Starter
Forum
Replies
Last Post