Setting Camber with Steeda Heavy Duty Upper Strut Mounts
#22
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: December 1, 2006
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
That sounds right. Do you have any other suspension modifications?
http://www.steeda.com/store/uploads/...-mounts--1.pdf
http://www.steeda.com/store/uploads/...-mounts--1.pdf
#23
This is all of the suspension stuff that I have installed at this time.
555-2003 - Steeda Stop The Hop Pak - Lowered Vehicles - 05-10
555-2551 - Steeda Adjustable Panhard Bar
555-2555 - Steeda Heavy Duty Panhard Bar Brace
555-1064 - Steeda Ultimate Swaybar Kit - Includes Billet Endlinks - 05-10
555-8206 - Steeda Ultra-Lite Springs, 1.25" Front, 1.5" Rear
555-8113 - Steeda Billet Front Swaybar Mounts
8750-1030 2 STR.T Strut
8250-1008 2 STR.T Shock
555-8120 Steeda heavy duty upper strut mounts
BTW, the strut tower brace and front sway bar endlinks are disconnected.
555-2003 - Steeda Stop The Hop Pak - Lowered Vehicles - 05-10
555-2551 - Steeda Adjustable Panhard Bar
555-2555 - Steeda Heavy Duty Panhard Bar Brace
555-1064 - Steeda Ultimate Swaybar Kit - Includes Billet Endlinks - 05-10
555-8206 - Steeda Ultra-Lite Springs, 1.25" Front, 1.5" Rear
555-8113 - Steeda Billet Front Swaybar Mounts
8750-1030 2 STR.T Strut
8250-1008 2 STR.T Shock
555-8120 Steeda heavy duty upper strut mounts
BTW, the strut tower brace and front sway bar endlinks are disconnected.
#24
I got it...the metal sleeve that slides over the strut was flipped. When I put the plates on, I took them straight out of the box and didn't pay attention to the diagram. I should not have assumed that they were assembled correctly in the box. I got one extra degree of camber too! Thanks for the help.
#25
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: December 1, 2006
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Glad you worked it out. It's been too long since I installed mine. Trying to remember what the sleeve is. Are you talking about the dust cap thing?
Last edited by randy_tho; 9/8/12 at 01:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SMBJoshy
2010-2014 Mustang
2
8/16/15 02:48 PM
tj@steeda
2015 - 2023 MUSTANG
0
7/30/15 06:47 AM