pypes mid muff
#64
Bullitt Member
Join Date: December 8, 2006
Location: Tewksbury, MA
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
It is. The discoloration is from the extra carbon exiting the exhaust from having no cats. I know my tips got significantly blacker since I took my cats off.
#65
Super Boss Lawman Member
Thread Starter
My PMM is on the wayIt had a scheduled delivery date of 3/17 but ill take it!!! I will be getting it installed tommorow I am gonna take my slp tips to see is they can weld them in there but IDK, the pipes tips don't look horrible..
#67
Cool let us know how you like them compared to the Stingers.
#70
Cobra Member
Join Date: August 5, 2008
Location: Arvada, CO
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Resurrecting an old thread here to see if anyone came up with a better solution to the Pypes tips turning yellow.
I'm running just the stock headers, cats, H, and have only had it about 6 months but they're ugly enough to require removal at this point. Definitely not just due to running an off road setup, thought that may worsen it.
May be possible to buff them out with silver polish or something similar, but not going to do that every 6 months, and besides the rolled edge looks cheap, and has a black streak where the condensation has dripped out.
I bought a set of Stainless Steel Systems's plain tips from PartsCheap for like $60 or so, they're just like these tips from their Adrenaline/Terminator series
http://www.stangmods.com/SSS-Cat-Bac...GT-p/00870.htm
And similar to these SLP:
but they're much too long, the SSS ones are about 12". The Pypes hangers are too close to the rear for these to work, so anybody wanting to buy them let me know. I did cut four longitudinal slashes into each tip and used a pipe expander as they weren't slip fit for a 2.5" pipe, so now they'll slip on and clamp easily.
I'm thinking of getting SLP tips like these at LMP that should fit better, definitely cheaper than going the full Loudmouth or muffler delete route, and shold be easier to put on, though will be twice the price of the SSS, and are only 3.5" diameter instead of the 4":
http://www.lmperformance.com/53765/73.html
Anybody know the length of these as they might be perfect:
http://www.slponline.com/view_product.asp?P=F31040
I'm running just the stock headers, cats, H, and have only had it about 6 months but they're ugly enough to require removal at this point. Definitely not just due to running an off road setup, thought that may worsen it.
May be possible to buff them out with silver polish or something similar, but not going to do that every 6 months, and besides the rolled edge looks cheap, and has a black streak where the condensation has dripped out.
I bought a set of Stainless Steel Systems's plain tips from PartsCheap for like $60 or so, they're just like these tips from their Adrenaline/Terminator series
http://www.stangmods.com/SSS-Cat-Bac...GT-p/00870.htm
And similar to these SLP:
but they're much too long, the SSS ones are about 12". The Pypes hangers are too close to the rear for these to work, so anybody wanting to buy them let me know. I did cut four longitudinal slashes into each tip and used a pipe expander as they weren't slip fit for a 2.5" pipe, so now they'll slip on and clamp easily.
I'm thinking of getting SLP tips like these at LMP that should fit better, definitely cheaper than going the full Loudmouth or muffler delete route, and shold be easier to put on, though will be twice the price of the SSS, and are only 3.5" diameter instead of the 4":
http://www.lmperformance.com/53765/73.html
Anybody know the length of these as they might be perfect:
http://www.slponline.com/view_product.asp?P=F31040
Thread
Thread Starter
Forum
Replies
Last Post
tacbear
Mustang Motorsports
0
9/27/15 12:57 PM
Evil_Capri
Mustang Motorsports
1
9/11/15 08:39 AM