PMM Installed
#22
My PMM system has a vibration (rattle) at 2400 RPM exactly, and it's especially noticeable on decel and up shifts when the tach falls through that RPM range. I looked everywhere and couldn't find any contact, so I started to suspect the incomplete welds in the mufflers themselves. If you look inside my mufflers, the rolled perforated metal sheet was not completely welded from one side to the other. I'm going to check the hangars, but if I can't find any issues there, I'm calling Pypes. I also have a ton of rust, even on the mufflers and tips. The system has only been on the car for 3 months.
#25
Super Boss Lawman Member
Thread Starter
My PMM system has a vibration (rattle) at 2400 RPM exactly, and it's especially noticeable on decel and up shifts when the tach falls through that RPM range. I looked everywhere and couldn't find any contact, so I started to suspect the incomplete welds in the mufflers themselves. If you look inside my mufflers, the rolled perforated metal sheet was not completely welded from one side to the other. I'm going to check the hangars, but if I can't find any issues there, I'm calling Pypes. I also have a ton of rust, even on the mufflers and tips. The system has only been on the car for 3 months.
#27
#28
i just looked at mine and my driver side aft most hanger is touching the frame a tiny bit....
ill have to listen carefully for it and see if it rattles on me, if so i will just bend it or cut a 1/2" off so it doesnt touch
ill have to listen carefully for it and see if it rattles on me, if so i will just bend it or cut a 1/2" off so it doesnt touch
#29
Super Boss Lawman Member
Thread Starter
Dam, after two days of driving I have had no vibrations and I think this exhaust sounds perfect!!! It gets better every dayI am really glad I made the switch from the stingers.I feel that if more people heard this system it would be the exhaust of choice for the s197... Just my thoughts...
Last edited by SONICBOOST; 3/17/08 at 04:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/10/15 12:44 PM