New Strut Brace in Town/clears engine cover!
#41
Cobra R Member
Thread Starter
Join Date: November 12, 2004
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
Well I must say BMR stuff is top notch. Very impressed. Clears cover nicely, no chance of scratching now. I took some picture of the indentations it makes in the hood liner. But as most have said the liner really isnt tight up against the hood. So I bet if you took it off and reapplied it using some 3m spray adhesive it would stick completely to hood and not even touch the strut bar. But if you ever have to replace the hood liner it would be a nasty sight underneath, LOL. Either way this thing is gorgeous. I like the fact they send it too you with out the emblems etc on it. You can install it without, I chose to advertise it for them as I am **** happy with there quality. It came with four washers, There is no way you are going to get enough thread in my mind if you add the washers. I left them off. Anyway heres some pics to get you salivating. I just painted the cover too, man that spray paint place matches the body color perfectly. Very happy with the outcome. See yall and bmr thanks for a great strut tower brace.
#43
Team Mustang Source
I should have mine this week. Looks good and really does clear the cover nicely. Dang you beat to the pictures but mine isn't red so I guess I'll post them anyway. Thanks for the heads-up on this product Sodaman!
#45
Cobra R Member
Thread Starter
Join Date: November 12, 2004
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
thanks,
yes I like it a lot, and yes if I didnt want anything on it I can leave the sticker off or take it off later. I just may add some ford racing logos or pony's etc. So I just thought I would put it on for now as I am very impressed with BMR's quality. The red powder coating is perfect, no flaws at all, even as tightening the nuts down, everything stayed nice and clean. I highly recommend this mod, I definitely felt a tighter front end after this mod. I already have the ford racing sway bars frt and rear, and It feels a little tighter with this mod. Graypny you will love it I am sure. See yall later.
yes I like it a lot, and yes if I didnt want anything on it I can leave the sticker off or take it off later. I just may add some ford racing logos or pony's etc. So I just thought I would put it on for now as I am very impressed with BMR's quality. The red powder coating is perfect, no flaws at all, even as tightening the nuts down, everything stayed nice and clean. I highly recommend this mod, I definitely felt a tighter front end after this mod. I already have the ford racing sway bars frt and rear, and It feels a little tighter with this mod. Graypny you will love it I am sure. See yall later.
#49
Has anyone noticed that the brace hitting the pad is causing your hood to have a slight distortion? I just put a Steeda two-bar brace (V6 version since it's made to clear the engine cover) on my 07 GT/CS and while it clears the engine cover with no problem if you look at the hood at the right angle you can see a rectangle where the bar is pressing on the padding. If you run your fingers over it you can't feel it in the hood so I'm not too worried, but I don't want to cause permanent damage. Do you think the pad will just wear down over time?
#51
Cobra R Member
Thread Starter
Join Date: November 12, 2004
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
No indentations at all to the actual hood with the bmr brace, clears the cover well and barely touches the liner. The hood closes easily and nothing is visible on the actual hood. If your bar is doing that to the hood it aint good. good luck
#53
Has anyone noticed that the brace hitting the pad is causing your hood to have a slight distortion? I just put a Steeda two-bar brace (V6 version since it's made to clear the engine cover) on my 07 GT/CS and while it clears the engine cover with no problem if you look at the hood at the right angle you can see a rectangle where the bar is pressing on the padding. If you run your fingers over it you can't feel it in the hood so I'm not too worried, but I don't want to cause permanent damage. Do you think the pad will just wear down over time?
#54
Shelby GT500 Member
Join Date: October 9, 2006
Location: It's tough in the jungle !
Posts: 2,758
Likes: 0
Received 1 Like
on
1 Post
Has anyone noticed that the brace hitting the pad is causing your hood to have a slight distortion? I just put a Steeda two-bar brace (V6 version since it's made to clear the engine cover) on my 07 GT/CS and while it clears the engine cover with no problem if you look at the hood at the right angle you can see a rectangle where the bar is pressing on the padding. If you run your fingers over it you can't feel it in the hood so I'm not too worried, but I don't want to cause permanent damage. Do you think the pad will just wear down over time?
#56
Cobra R Member
Thread Starter
Join Date: November 12, 2004
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
Sodaman, is this a pair of fiery dice hanging from your rear view mirror? http://forums.bradbarnett.net/attach...1&d=1173740754
LOL,
Yes I had to do it. I actually caught those at mardi gras in new orleans a couple of months ago. I thought it would be fitting with the stang. Doesnt quite match the colors I have, but since my stang is redfire, well had to add some. Maybe someday add some hireman fire to some things. I actually love the dice. Thats just me thou. Hopefully you liked them, see ya.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
7/30/15 06:47 AM