Has any one done a Turbo yet??
#42
Bullitt Member
Join Date: June 28, 2006
Location: Providence Forge, VA
Posts: 336
Likes: 0
Received 1 Like
on
1 Post
It’s my understanding that the turbo dyno charts look so much different than the TS charts because the dyno can’t keep enough load on the turbo at high rpm to keep the boost levels up. Subsequently the torque curves aren’t up where they should be at higher RPM levels.
Earl
Earl
#43
The Mufflers are stock as well as the rest of the drivetrain, his car now has 3.73. But other than that its bone stock.
Here is a link to a vid of the car at the track, if you notice it still has the stock muff's on it.
http://www.powerhouse411.com/playme.php?id=Redfire1.wmv
#45
Powerhouse makes a very nice kit that isn't too difficult to install with typical tools.
I opted for a custom kit b/c I wanted a bit more. It actually cost me about $800 more for my kit and not cutting any corners...not that Powerhouse did. I just went for some products that wouldn't limit me in the HP catagory.
Precision 76mm ballbearing turbo
JGS wastegate
Greddy BOV
1200 hp rated intercooler
I opted for a custom kit b/c I wanted a bit more. It actually cost me about $800 more for my kit and not cutting any corners...not that Powerhouse did. I just went for some products that wouldn't limit me in the HP catagory.
Precision 76mm ballbearing turbo
JGS wastegate
Greddy BOV
1200 hp rated intercooler
Why that JGS wastegate? All these parts were $800?
I knowthe normal install is 1000 how much was extra labor cost
#46
Join Date: July 12, 2004
Posts: 2,260
Likes: 0
Received 0 Likes
on
0 Posts
JGS makes quality parts. Not too expensive either. My setup was roughly $800 over the price of most kits. In other words...for example...if a kit cost you $5000, mine cost me $5800. Labor is going to be different for every shop. As I understand it, the Powerhouse kit is pretty simple to install yourself. There's plenty of guys online that have that could give support as well as the Powerhouse guys are very helpful if you have a snag. They have detailed instructions for the install.
Thread
Thread Starter
Forum
Replies
Last Post
Antigini-GT/CS
2005-2009 Mustang
5
10/5/15 09:43 AM