FORD RACING COLD AIR INTAKE KIT!
3/5/07, 11:35 AM
#81
Mach 1 Member
I'm not looking for the one from S&B that Ford doesn't sell anymore - the one that Ford racing sells (Steeda) is the one I am looking for. It comes in the power/drag paks from FRPP but I just want the CAI if it is available.
3/5/07, 12:30 PM
#82
Cobra R Member
Thread Starter
Join Date: November 12, 2004
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
http://www.fordracingparts.com/parts...tKeyField=9286
good luck, it does come with a programmer thou. I dont know if you can get it by itself. You may want to ask KC
3/5/07, 02:42 PM
#83
Mach 1 Member
OH ok, yah its available on the ford racing site right below the drag paks. you have to click on the + sign to open up everything available in that section.
http://www.fordracingparts.com/parts...tKeyField=9286
good luck, it does come with a programmer thou. I dont know if you can get it by itself. You may want to ask KC
http://www.fordracingparts.com/parts...tKeyField=9286
good luck, it does come with a programmer thou. I dont know if you can get it by itself. You may want to ask KC
thanks
3/5/07, 09:10 PM
#84
SUPERCHARGED RED ROCKET ------------------Master-Moderator
3/5/07, 09:24 PM
#85
Former Vendor
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
I don't sell the FRPP kit much, but I sell the Steeda kit w/SCT XCal2 for $619.99? There's not a high demand for that kit, as JLT /C&L really took it over.
CR
Tillman Speed
CR
Tillman Speed
3/5/07, 09:39 PM
#86
SUPERCHARGED RED ROCKET ------------------Master-Moderator
Does that price also include the high-flow inlet elbow ? if it does, then it would be in his best interest to purchase the Steeda/SCT combo from you although I don't know why the demand is so low ? from a performance standpoint, it provides just as good Torque and HP increases as the JLT and C&L IMHO...
3/5/07, 10:10 PM
#87
Former Vendor
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, thats the HF inlet...
I don't know...maybe I don't push them enough? I think they're a great system... great quality as well...
I guess I'll have to start pushing it more, because it's genuinely a nice intake.
I can't wait until our webstore is populated. It's going to be so much easier!
CR
Tillman Speed
I don't know...maybe I don't push them enough? I think they're a great system... great quality as well...
I guess I'll have to start pushing it more, because it's genuinely a nice intake.
I can't wait until our webstore is populated. It's going to be so much easier!
CR
Tillman Speed
3/6/07, 11:17 AM
#88
Member
Join Date: November 4, 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I heard from reliable sources, That when you use the Steeda's Elbow on the Ford Racing cold air and in conjuction with Steeda's it can't be beat. Has anyone done a comparison to the JLT cold air to the full Steeda cold air yet?
3/6/07, 11:50 AM
#89
Former Vendor
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
That would be the same as the Steeda full kit with the high flow inlet. It is a nice increase in horsepower, and pulls the same numbers JLT & C&L do.
CR
Tillman Speed
CR
Tillman Speed
3/6/07, 01:56 PM
#92
Member
Join Date: November 4, 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
3/7/07, 08:14 PM
#95
SUPERCHARGED RED ROCKET ------------------Master-Moderator
I don't know if you're aware of this or not ? but the Ford racing cold air intake and the Steeda intake are both one in the same with the exception of their generic flash tool..In fact Steeda designs the cold air intake for Ford as a direct result of their partnership in Ford's technology transfer program..In addition, the FRPP/Steeda CAI is also factory equipped on the 2007 Shelby GT and is also fully warranted under the all new Ford Racing Performance Parts warranty package..
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Ecoboost
1
7/25/15 06:32 PM