Brenspeed's Fall Dyno day
9/24/07, 06:45 AM
#1
Legacy TMS Member
Thread Starter
Brenspeed's Fall Dyno day
Here's the infor for Brenspeed fall dyno days. Dunno if I can make it as I'm working 12 hour midnights that weekend but I'll try.
Dyno Day October 27th 2007!
Break out the sweatshirts our Fall dyno day is near! Last spring we again ran 50 cars on our chassis dyno and expect as many this Fall. If you have not attended a Brenspeed dyno day you should really consider visiting even if you don't bring your car. Typically you will see 50 different cars on our chassis dyno so there will be plenty to see. Vette's, Mustangs, Vipers, Trucks, Trans-Am's, and all types of other vehicles attend. We have free food, drinks, and prizes for the high and low horsepower of the day. If you like horsepower in general and all types of cars this is for you. Below you will find specific event details.
The Cost
$49 per vehicle for 3 runs on our Dynojet chassis dyno FIRST COME FIRST SERVE. If you drive from out of state we will be sure you get a turn on the dyno. We will monitor your horsepower, torque, and air fuel ratio. After we make 3 pulls your graphs will be printed for you to keep. There are only minutes between pulls so please do not plan on trying to tune your vehicle. These are dyno evaluation style pulls.
Event Times
Saturday October 27th from 8am to 5pm
Free lunch is served from 11am until 1pm.
We expect a great turn out. For those of you who are traveling a long distance to attend and you need hotel information please E-mail customerservice@brenspeed.com
Dyno Day October 27th 2007!
Break out the sweatshirts our Fall dyno day is near! Last spring we again ran 50 cars on our chassis dyno and expect as many this Fall. If you have not attended a Brenspeed dyno day you should really consider visiting even if you don't bring your car. Typically you will see 50 different cars on our chassis dyno so there will be plenty to see. Vette's, Mustangs, Vipers, Trucks, Trans-Am's, and all types of other vehicles attend. We have free food, drinks, and prizes for the high and low horsepower of the day. If you like horsepower in general and all types of cars this is for you. Below you will find specific event details.
The Cost
$49 per vehicle for 3 runs on our Dynojet chassis dyno FIRST COME FIRST SERVE. If you drive from out of state we will be sure you get a turn on the dyno. We will monitor your horsepower, torque, and air fuel ratio. After we make 3 pulls your graphs will be printed for you to keep. There are only minutes between pulls so please do not plan on trying to tune your vehicle. These are dyno evaluation style pulls.
Event Times
Saturday October 27th from 8am to 5pm
Free lunch is served from 11am until 1pm.
We expect a great turn out. For those of you who are traveling a long distance to attend and you need hotel information please E-mail customerservice@brenspeed.com
9/28/07, 06:49 PM
#6
GT Member
Join Date: August 15, 2006
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
I'll mark it on the calendar. Hope to make this my 3rd Dyno Day with Brenspeed. It was good to see Scott and Tom there this spring. Probably won't run my car this time unless it is particularly cold because I really haven't done anything to it since last time. It's always fun to see the other cars there though.
9/29/07, 11:00 AM
#8
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
I'll mark it on the calendar. Hope to make this my 3rd Dyno Day with Brenspeed. It was good to see Scott and Tom there this spring. Probably won't run my car this time unless it is particularly cold because I really haven't done anything to it since last time. It's always fun to see the other cars there though.
Hope to see you at Brenspeeds again. I'll run my car again if I can get Doug's latest auto tune before than. Just curious. Sorry you can't make it to Brown County.
Scott.
9/29/07, 03:49 PM
#10
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
Yeap!!! If I get it in time. I ran Lidio's in May. They don't care or even know who's tune is in the car. They are great guys up there!!!!!!! I also have Brent's 93 C&L tune on my tuner. Maybe you should come and join us for this one. I believe you are running a Brenspeed tune are you not???? Bring it on and lets see what it will run. I would like to meet you in person!!
Scott
9/29/07, 07:56 PM
#13
I won that in the spring...157rwhp! (Real Wicked Horse Power) that is.
....Dont know if I'll make it or not, (low on the moneys...no mods since then), but if I do, I'll try to get my brother in law to come with his Small Block 427 '64 Farilane....
....Dont know if I'll make it or not, (low on the moneys...no mods since then), but if I do, I'll try to get my brother in law to come with his Small Block 427 '64 Farilane....
10/1/07, 08:49 AM
#14
Shelby GT500 Member
Join Date: October 9, 2006
Location: It's tough in the jungle !
Posts: 2,758
Likes: 0
Received 1 Like
on
1 Post
Yeap!!! If I get it in time. I ran Lidio's in May. They don't care or even know who's tune is in the car. They are great guys up there!!!!!!! I also have Brent's 93 C&L tune on my tuner. Maybe you should come and join us for this one. I believe you are running a Brenspeed tune are you not???? Bring it on and lets see what it will run. I would like to meet you in person!!
Scott
Scott
10/1/07, 09:43 AM
#15
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
275 rwhp/279 rwt. with the 18'' Steeda wheels and 275 tires. Brent told Tom281 that his 18" wheels cost him around 20 hp. over the 17"ers
10/1/07, 11:46 AM
#17
Legacy TMS Member
Yea come join in the fun man!
And yes Scott, my car dyno'ed 439 with the stock 17" combo but dropped right at 20hp & 20 tq with the 18" chrome deep dish bullitts.
And yes Scott, my car dyno'ed 439 with the stock 17" combo but dropped right at 20hp & 20 tq with the 18" chrome deep dish bullitts.
10/1/07, 04:32 PM
#20
GT Member
Join Date: August 15, 2006
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
JK. Hope you can make it.