Car Care Shine Up Your Stang for Show Season, Fix a Dent, And General Car Cleaning

Paint correction Kona Boss

Old Jun 6, 2013 | 10:22 AM
  #1  
max5ive0's Avatar
Thread Starter
Mach 1 Member
 
Joined: May 19, 2012
Posts: 887
Likes: 0
From: Troy, MI
Paint correction Kona Boss

Waxed until wee hours of the morning but I will post more pics in good light later. My method:
1. long talks with Marc Harris, the most knowledgeable, and most caring businessman I know. Read his comments and his website folks, AutoLavish.com he's got this **** down to a science. I mean really, he seems to know the characteristics and chemical properties of a vast assortment of products! Thanks for all the consultation, Marc!!!

2. Three bucket wash with grit guards. One solely for wheels. ReTHICKulous wool wash mit. Rinse with sheeting method.
3. Blow dry with leaf blower then pulled waffle microfiber across surface, no pressure. I am amazed how thoroughly this lifts off water!
4. Clay bar. Truthfully I did horizontal surfaces first and it was really clean so I skipped the sides. I did this already last year and it doesn't get driven much.
5. Meguires 205 on Orange pad and PorterCable set to 5.
6. Rinsed and repeat step 3. Just because it sat overnight and had accumulated lots of pollen and falling cotton. Looks like Winterwonderland where I live.
7. Dodo juice Lime Prime with abrasives and gray pad also set to 5. Make sure to wipe off quickly!
8. Dodo juice Supernatural Hybrid sealant/wax applied by hand with red applicator pad.
9. Graciously take the brunt of jokes from wife and neighbors because they think i am coocoo for coco puffs



Paint correction Kona Boss-image-2454028984.jpg



Paint correction Kona Boss-image-4063915705.jpg



Paint correction Kona Boss-image-378808770.jpg



Paint correction Kona Boss-image-3999026939.jpg



Paint correction Kona Boss-image-8883097.jpg



Paint correction Kona Boss-image-1571728619.jpg
Reply
Old Jun 6, 2013 | 11:39 AM
  #2  
Darth Lascivious's Avatar
GT Member
 
Joined: May 30, 2013
Posts: 133
Likes: 0
From: Charleston, SC
Well done. Looks amazing in pics and sure it looks even better in person.
Reply
Old Jun 6, 2013 | 03:22 PM
  #3  
MarcHarris's Avatar
Detailing Guru
 
Joined: May 16, 2011
Posts: 348
Likes: 0
From: SE Michigan
Yea... I'd say that turned out well.

Now come on over and get some practice on my car
Reply
Old Jun 6, 2013 | 03:36 PM
  #4  
max5ive0's Avatar
Thread Starter
Mach 1 Member
 
Joined: May 19, 2012
Posts: 887
Likes: 0
From: Troy, MI
Lol, Thanks Marc. So next time I will have to try 5.5" pads per Mike huh? Didnt realize the 6.5" might be too big.
Reply
Old Jun 6, 2013 | 03:55 PM
  #5  
MarcHarris's Avatar
Detailing Guru
 
Joined: May 16, 2011
Posts: 348
Likes: 0
From: SE Michigan
Originally Posted by max5ive0
Lol, Thanks Marc. So next time I will have to try 5.5" pads per Mike huh? Didnt realize the 6.5" might be too big.
Mike can be a little loony at times. I'm an all 6.5 inch pad guy myself and don't have many issues. On huge super hardcore jobs, sure I have multiple sizes of everything, but that's hardly needed for a car that's kept in the condition of your beautiful Boss.
Reply
Old Jun 6, 2013 | 05:25 PM
  #6  
max5ive0's Avatar
Thread Starter
Mach 1 Member
 
Joined: May 19, 2012
Posts: 887
Likes: 0
From: Troy, MI
"Excuse me, Ma'am, please keep your child at a safe distance, as looking directly at the white top could cause severe permanent damage to his/her eyes and I can't be held responsible for your child's newly developed blindness!"

Isn't that about right, Marc?
Reply
Old Jun 6, 2013 | 08:41 PM
  #7  
MarcHarris's Avatar
Detailing Guru
 
Joined: May 16, 2011
Posts: 348
Likes: 0
From: SE Michigan
I will say that the sun's reflection off your white roof was extraordinarily bright to the point there should be some type of warning prior to making eye contact.
Reply
Old Jun 8, 2013 | 05:22 PM
  #8  
DaGonz's Avatar
Mach 1 Member
 
Joined: May 27, 2012
Posts: 620
Likes: 2
From: Marlborough, MA
The shine is so deep you can dive into it!
Reply
Old Jun 10, 2013 | 01:40 PM
  #9  
mikenapoli's Avatar
Member
 
Joined: May 24, 2013
Posts: 39
Likes: 0
From: Charlotte, NC
Originally Posted by MarcHarris
Mike can be a little loony at times. I'm an all 6.5 inch pad guy myself and don't have many issues. On huge super hardcore jobs, sure I have multiple sizes of everything, but that's hardly needed for a car that's kept in the condition of your beautiful Boss.
Lol, I see how it is!

Strictly going from my experience with my PCXP, it was woefully underpowered compared to the Griots and Meg's G110. It had a hard time spinning 6.5 pads no matter what I did. Both the 110 and the GG are better in that regard, although others might have better luck with it.


All that aside, that reflection is remarkable! Job well done!
Reply
Old Jun 10, 2013 | 05:13 PM
  #10  
MarcHarris's Avatar
Detailing Guru
 
Joined: May 16, 2011
Posts: 348
Likes: 0
From: SE Michigan
^ ok ok ok. Maybe this guy is onto something.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carid
Vendor Showcase
6
Mar 30, 2021 09:29 AM
Cobiecane
5.0L GT Modifications
21
Oct 23, 2015 08:44 AM
exgto
2012-2013 BOSS 302
9
Oct 7, 2015 01:47 PM
GLOCKer
General Mustang Chat
2
Sep 28, 2015 05:20 PM
Christopher Fox Wallace
Fox Mustangs
1
Sep 26, 2015 11:55 AM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 05:55 AM.