Ponies on The Run (Again)
Team Mustang Source
Muahahahahah....
Ninja baby FTW !
Can't post anything right now but will post a little later today, probably around 2 or so.
I learned my lesson and I will not jinx myself again. I ain't saying nuthin' til it's done.
Knott's would be nice
<back to ninja mode>
Ninja baby FTW !
Can't post anything right now but will post a little later today, probably around 2 or so.
I learned my lesson and I will not jinx myself again. I ain't saying nuthin' til it's done.
Knott's would be nice
<back to ninja mode>
Legacy TMS Member
nice tanks Bill!! I bet that will look great!!
Can't wait to see your wheel selection Brian!
The way things are going I'll be lucky to have my car by
knotts
Can't wait to see your wheel selection Brian!
The way things are going I'll be lucky to have my car by
knotts
What's wrong now? No SCT yet? If no, I'd call them up and ask them if it's okay to fire up with the stock tune. If they say no, tell them that you wish you had the tune so you can!
It's official!
I'm now a believer in the Mothers Billet Polish!!
This was the 'finisher' polish I was saving til the end just to spiff it up. Instead, it layed down a mirror like finish!
Before (Chris' reflection)
Comparison between the Mag & Aluminum Polish and the Billet Metal Polish
Final buff (yeah, that's my work PC )
This was the 'finisher' polish I was saving til the end just to spiff it up. Instead, it layed down a mirror like finish!
Before (Chris' reflection)
Comparison between the Mag & Aluminum Polish and the Billet Metal Polish
Final buff (yeah, that's my work PC )
Team Mustang Source
George WTF !!! I hate when a vendor does that. Have they even shipped it yet ? It'd be somewhat OK if you knew up front but this is what 2 weeks now of nothing.
Let's just say I reached the point of no return now.
Wheels....
Since I haven't gotten a for sure if a 275/40 would be big enough I decided to go staggered, not my first choice though. 18x9 up front 18x10 in back. I love the look of the bullitt and the FR500 tire and if I had the money the CS67 wheel.
Everywhere I looked a chrome Torq Thrust is about 300 bucks for the rear and over 200 in the front. The anthracite is quite a bit less and I do like that look.
or
Or the chrome ones.
Let's just say I reached the point of no return now.
Wheels....
Since I haven't gotten a for sure if a 275/40 would be big enough I decided to go staggered, not my first choice though. 18x9 up front 18x10 in back. I love the look of the bullitt and the FR500 tire and if I had the money the CS67 wheel.
Everywhere I looked a chrome Torq Thrust is about 300 bucks for the rear and over 200 in the front. The anthracite is quite a bit less and I do like that look.
or
Or the chrome ones.
Brian, are you looking at the Anthacite Bulitts?
With 18x10's you can run some good size meats back there.
With 18x10's you can run some good size meats back there.
Team Mustang Source
That's the plan. I'm sticking with 285/40 for right now because it's the closest to the original
diameter of the stock tire. Should be pretty good size-wise
Again, great info. Plan on doing some shopping this weekend to nail a few things down
Dude, call and complain. It's your God given American right.
Very true. We used to be special, but when Luis got his, it was all over.
285's are some decent meats. I like the staggered look, so I'm a supporter of that move.
Very true. We used to be special, but when Luis got his, it was all over.
285's are some decent meats. I like the staggered look, so I'm a supporter of that move.
Last edited by TacoBill; 3/26/08 at 01:45 PM. Reason: sp
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Back from the dead and at work!
First day back at work and it feels good! Never thought I would say that! This week end I'm thinking Cars & Coffee anyone up for that. Pink's Firday night can't wait I need a Tube Steak big time Ray are you in?
Jed at work!
Jed at work!
Problem: The Roush has a 2 person limit.
Solution:
Pinks roll call: Me, Chris, Kai, Jed, Luis..
Anyone else?
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
I'm now a believer in the Mothers Billet Polish!!
This was the 'finisher' polish I was saving til the end just to spiff it up. Instead, it layed down a mirror like finish!
Before (Chris' reflection)
Comparison between the Mag & Aluminum Polish and the Billet Metal Polish
Final buff (yeah, that's my work PC )
This was the 'finisher' polish I was saving til the end just to spiff it up. Instead, it layed down a mirror like finish!
Before (Chris' reflection)
Comparison between the Mag & Aluminum Polish and the Billet Metal Polish
Final buff (yeah, that's my work PC )
I did it during my Union negotiated break. That's my story and I'm sticking to it.
99% have aftermarket wheels??
Oh yeah.. I forgot you were too cold to get out from my car at the Sunset meeting place and just watched the Simpsons on the Alpine.
C'mon Leo.. like you got better things to that morning.
C'mon Leo.. like you got better things to that morning.
Last edited by TacoBill; 3/26/08 at 03:11 PM.
Cobra Member
Join Date: November 15, 2007
Location: Torrance, CA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
brian - discount tire they're 5 minutes from my house and have always been great. Always hook it up and stand by their work/products.
now you have me thinking of the chrome shelby torque thrusts. So hard to choose
now you have me thinking of the chrome shelby torque thrusts. So hard to choose
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Maybe I'll go but I wouldn't bet on it.
BTW-Just got my MGW bezel and SHR T-shirt. I may have to wear it to Fab Fords.
Legacy TMS Member
Hey Bill, nice tanks and new avatar. I know those people!
GTR Member
Join Date: January 26, 2006
Location: Central Florida
Posts: 4,639
Likes: 0
Received 0 Likes
on
0 Posts