General Mustang Chat Not Model Year Specific

Ponies on The Run!

Thread Tools
 
Search this Thread
 
Old May 30, 2008 | 11:28 PM
  #20221  
JedCranium's Avatar
Shelby GT500 Member
 
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Originally Posted by TacoBill
Luis??? Stop holding out on us.

What you order? A blower?

Hummm yes Luis what could it be?

Jed
Reply
Old May 31, 2008 | 12:13 AM
  #20222  
Superfly SN95's Avatar
Cobra Member
 
Joined: November 15, 2007
Posts: 1,460
Likes: 0
From: Torrance, CA
you guys are blowing it (no pun intended ) out of proportion. I just ordered the gt500 spoiler. Figure I finally just buy now, think later.
Reply
Old May 31, 2008 | 02:13 AM
  #20223  
2k7gtcs's Avatar
Post *****
 
Joined: October 9, 2007
Posts: 32,808
Likes: 163
Thank you Brian, George, Bill, and Luis for the MGW advice. I thought it was the right move but now I know it for sure!

Just spent the past 6 hours pulling and redoing audio install. Trying to trace down some alternator whine. Also installed the Bluetooth module on my deck so now I can talk hands free while going through the gears. And it'll automatically mute when I get calls, I think it'll be cool. Hopefully no more missing calls listening to a little alt rock.

Take it easy guys.
Reply
Old May 31, 2008 | 02:22 AM
  #20224  
LEO_06GT's Avatar
Legacy TMS Member
 
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Track results.......

New record.....



















Doesn't make any sense but some how I got several 1.9 60fts yet my best ET was still 8.426. Eithway I had tons of fun as was treeing people like nobody's business. Unfortunatly the 12 second time slip eludes me again. Next time I think I'm going to try going with only a 1/4 tank of gas as this time I had over half. That might be just enough to shave of those 26 100ths of a second.

EDIT-Got to hear what a bottle of Nitrous sounds like when it blows up. Some pics a fellow SDMC member took at the track.
Attached Thumbnails Ponies on The Run!-qualcomm-may-2008-001.jpg   Ponies on The Run!-qualcomm-may-2008-004.jpg   Ponies on The Run!-qualcomm-may-2008-008.jpg   Ponies on The Run!-qualcomm-may-2008-010.jpg  

Last edited by LEO_06GT; May 31, 2008 at 02:48 AM.
Reply
Old May 31, 2008 | 02:24 AM
  #20225  
JedCranium's Avatar
Shelby GT500 Member
 
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
The meeting spot prior to 281 drive in

Here's a map where Brian suggested to meet. I'll try to be there with Steve, Monica, George by 9:30 a.m. so we can hook up with you fellas

Jed

Reply
Old May 31, 2008 | 05:37 AM
  #20226  
tom281's Avatar
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Originally Posted by karman
Are they gonna beat my Homeboys?
LOL, Karman said homeboys......

Originally Posted by TacoBill
Luis??? Stop holding out on us.

What you order? A blower?
Originally Posted by JedCranium
Hummm yes Luis what could it be?

Jed
Dang, this little Hoosier had the inside track from 2000 miles away...... I feel honored, Luis!

Originally Posted by 2k7gtcs
Thank you Brian, George, Bill, and Luis for the MGW advice. I thought it was the right move but now I know it for sure!

Just spent the past 6 hours pulling and redoing audio install. Trying to trace down some alternator whine. Take it easy guys.
Make sure you have a good, clean ground. Also make sure the bolt that's holding the factory charge wire on the alternator is tight- I've seen them loose before and generating noise there too.

Originally Posted by LEO_06GT
Track results.......
Doesn't make any sense but some how I got several 1.9 60fts yet my best ET was still 8.426. Eithway I had tons of fun as was treeing people like nobody's business. Unfortunatly the 12 second time slip eludes me again. Next time I think I'm going to try going with only a 1/4 tank of gas as this time I had over half. That might be just enough to shave of those 26 100ths of a second.
Good times Leo.
Reply
Old May 31, 2008 | 09:03 AM
  #20227  
TacoBill's Avatar
 
Joined: September 23, 2004
Posts: 10,037
Likes: 5
From: SoCal
Originally Posted by LEO_06GT
Track results.......

New record.....
Good going Leo!

Were you talking to me in that first pic?
Reply
Old May 31, 2008 | 09:56 AM
  #20228  
Superfly SN95's Avatar
Cobra Member
 
Joined: November 15, 2007
Posts: 1,460
Likes: 0
From: Torrance, CA
Good times Leo
Reply
Old May 31, 2008 | 03:44 PM
  #20229  
kh765's Avatar
Cobra R Member
 
Joined: May 8, 2006
Posts: 1,967
Likes: 0
From: Florida
Originally Posted by LEO_06GT
Doesn't make any sense but some how I got several 1.9 60fts yet my best ET was still 8.426. Eithway I had tons of fun as was treeing people like nobody's business. Unfortunatly the 12 second time slip eludes me again. Next time I think I'm going to try going with only a 1/4 tank of gas as this time I had over half. That might be just enough to shave of those 26 100ths of a second.
Congrats Leo. I think having less gas is a pretty big help. I knocked off quite a bit going with an empty tank. I need to go back with a fully optimized setup too.
Reply
Old May 31, 2008 | 03:45 PM
  #20230  
kh765's Avatar
Cobra R Member
 
Joined: May 8, 2006
Posts: 1,967
Likes: 0
From: Florida
Originally Posted by tom281
LOL I think I'm picking up what you're putting down......
Maybe I'm too young to appreciate it.
Reply
Old May 31, 2008 | 06:05 PM
  #20231  
tom281's Avatar
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Quiet in here today.......

Well I had a wheel lock key break on me today, so I can't get my wheels/tires off...... what a biotch that is. And I don't have a spare, so I gotta call the company on Monday and have one sent out. I did manage to touch up my calipers carefully while spinning the wheels around by hand.

Also I removed and replaced all of the vinyl on the back 1/2 of the car, and was successful in wrapping my GT500 spoiler with one piece, something I couldn't do last year. (Ford uses two pieces too) I also slightly modified my "S197 GT" side stripes...... debating on whether or not to rip them off and install the fading stripes I bought a while ago.

Tomorrow I plan to wash/scrub/buff/wax the rocker panels and front/rear bumpers. Then wash/wax the entire car and clean up the engine bay.
Reply
Old May 31, 2008 | 06:25 PM
  #20232  
Robbieg's Avatar
Legacy TMS Member
 
Joined: November 4, 2005
Posts: 953
Likes: 13
From: Central FL
Originally Posted by tom281
Quiet in here today.......

Well I had a wheel lock key break on me today, so I can't get my wheels/tires off...... what a biotch that is. And I don't have a spare, so I gotta call the company on Monday and have one sent out. I did manage to touch up my calipers carefully while spinning the wheels around by hand.

Also I removed and replaced all of the vinyl on the back 1/2 of the car, and was successful in wrapping my GT500 spoiler with one piece, something I couldn't do last year. (Ford uses two pieces too) I also slightly modified my "S197 GT" side stripes...... debating on whether or not to rip them off and install the fading stripes I bought a while ago.

Tomorrow I plan to wash/scrub/buff/wax the rocker panels and front/rear bumpers. Then wash/wax the entire car and clean up the engine bay.
Sounds like you had a busy day, how hard was it to get the vinyl off?
Reply
Old May 31, 2008 | 06:26 PM
  #20233  
LEO_06GT's Avatar
Legacy TMS Member
 
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Originally Posted by TacoBill
Good going Leo!

Were you talking to me in that first pic?
Thanks. Yup that's when I was talking to you waiting to go through tech.
Reply
Old May 31, 2008 | 06:54 PM
  #20234  
tom281's Avatar
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Originally Posted by Robbieg
Sounds like you had a busy day, how hard was it to get the vinyl off?
Easy....... A lot of people complain about removing vinyl but I've always found it to be really easy. The portions that I removed have been on there for a little over 2 years. I wanted to R&R them mainly just because they're white and because of the dirt that the rear of the car sees, they've become a little discolored. My car has a nice butt again now that she's new and shiny.
Reply
Old May 31, 2008 | 08:56 PM
  #20235  
habu's Avatar
Team Mustang Source
 
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
Originally Posted by tom281
Easy....... A lot of people complain about removing vinyl but I've always found it to be really easy. The portions that I removed have been on there for a little over 2 years. I wanted to R&R them mainly just because they're white and because of the dirt that the rear of the car sees, they've become a little discolored. My car has a nice butt again now that she's new and shiny.
Well 2 years isn't too bad. We were talking earlier today about how freaking dirty the ***-end of the cars get. If there was some way to break up the low-pressure of that area you could make a mint on s197 owners.

It's been quiet prolly 'cause the So Cal guys are all tired from the 281motorsports show and brew afterwards.

The show was much bigger than I expected must have been 30, maybe 40 cars. It was a nice show. There was no shade at all and even though it wasn't a blazing day today it just sapped all my energy.

Between Leo and my self we made out like bandits. I won in the raffle a set of JBA Stainless Steel shorties and Leo won a Sub, speakers and some other stuff that is work about a grand or so. That flippin sub has got to be at least 50 lbs and it's made of aluminum... huge.

Afterwards we went to a bar/pub here in Fullerton called Heroes. 90 or 100 beers on tap. After a few brews and a mountain of nachos, well at least I was dead to the world.

Still all-n-all great time with George, Jed, Leo, Steve. Can't wait for the next outing all ready.

BTW. The Brea show by the OCMC is June 15th. Talked to Frank Morales and he says it is still OK to mail in the pre-registration. Probably gonna be in that show. It's just to **** close not to be.

Last edited by habu; May 31, 2008 at 09:44 PM.
Reply
Old May 31, 2008 | 09:22 PM
  #20236  
tom281's Avatar
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Sounds awesome! Congrats guys!
Reply
Old Jun 1, 2008 | 02:49 AM
  #20237  
TacoBill's Avatar
 
Joined: September 23, 2004
Posts: 10,037
Likes: 5
From: SoCal
Originally Posted by tom281
Well I had a wheel lock key break on me today, so I can't get my wheels/tires off...... what a biotch that is.
Some of you still use wheel locks?

I haven't seen a car on milk crates from having their wheels ripped off since the last decade.



Originally Posted by habu
It's been quiet prolly 'cause the So Cal guys are all tired from the 281motorsports show and brew afterwards.
Congrats to you and Leo on winning some cool stuff!

Sorry I missed the party today, but I'm sure we'll hook up at other shows this year.
Reply
Old Jun 1, 2008 | 03:04 AM
  #20238  
JedCranium's Avatar
Shelby GT500 Member
 
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
A at 281 Mortorsports

Fun time at 281 Mortorsports, we drove there from Cars & Coffee check out the pix...

We begin the drive to the Downey Savings staging area...

More pictures in the morning I'm falling a sleep


Last edited by JedCranium; Jun 1, 2008 at 10:17 AM.
Reply
Old Jun 1, 2008 | 03:16 AM
  #20239  
TacoBill's Avatar
 
Joined: September 23, 2004
Posts: 10,037
Likes: 5
From: SoCal
Originally Posted by JedCranium
More pictures in the morning I'm falling a sleep
I suppose the Huell Howser dog from Pink's is to blame.

Too much food tonight dude!!
Reply
Old Jun 1, 2008 | 05:27 AM
  #20240  
tom281's Avatar
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Originally Posted by TacoBill
Some of you still use wheel locks?

I haven't seen a car on milk crates from having their wheels ripped off since the last decade.

These came on the car when I bought it new in '05.
Reply



All times are GMT -6. The time now is 07:12 PM.