Midwest Post Club or Event Information and Meet Stangers in Your Area

Midwest TMS'ers General Communication Thread

Thread Tools
 
Search this Thread
 
Old Dec 9, 2007 | 03:22 PM
  #661  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Hit it with a lubricant and let it soak overnight- would that help?

Otherwise, I remember that spinach always worked for Popeye..... you could try that, pops.



Reply
Old Dec 9, 2007 | 03:54 PM
  #662  
70MACH1OWNER's Avatar
Legacy TMS Member
 
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Originally Posted by tom281
Hit it with a lubricant and let it soak overnight- would that help?

Otherwise, I remember that spinach always worked for Popeye..... you could try that, pops.




It's soaking as we speak. I will cut a piece on pipe tomorrow at work and give it one last yank. It also has loctite on it. So the initial pull takes more a$$. I should have enough but we will see. Biggest issue is with the over the axle pipes still in the car you only have from about 5 o'clock to about 7 o'clock to work within.
Scott
Reply
Old Dec 10, 2007 | 10:44 AM
  #663  
dly's Avatar
dly
Legacy TMS Member
 
Joined: June 24, 2006
Posts: 2,501
Likes: 16
I'm so disappointed with Tom, here is a perfect chance for some old fart slams and ....... nothing

I expected something like...... Hey Old Fart that a bigger hit off your Oxygen tank and you might be able to crack that nut........or...... Hey Old Fart try taking the center support bar off your Walker to use as a Cheater bar.....

Just Kidding Scott I think the problem is the way you'll sticking your tongue out, try the other side of your mouth .

Hope you get r done tonight
Reply
Old Dec 10, 2007 | 01:49 PM
  #664  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Hey old fart, tie your breaker bar onto the back of your mobility scooter and floor that sucker!




YEEE HAW!

ps- thanks for the inspiration darrell
Reply
Old Dec 10, 2007 | 01:53 PM
  #665  
70MACH1OWNER's Avatar
Legacy TMS Member
 
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Originally Posted by dly
I'm so disappointed with Tom, here is a perfect chance for some old fart slams and ....... nothing

I expected something like...... Hey Old Fart that a bigger hit off your Oxygen tank and you might be able to crack that nut........or...... Hey Old Fart try taking the center support bar off your Walker to use as a Cheater bar.....

Just Kidding Scott I think the problem is the way you'll sticking your tongue out, try the other side of your month .

Hope you get r done tonight

This OLD FART has a bigger pipe tonight and am headed out to give it my best. Hope I don't blow a nut. And I'll try to tongue on the other side.
Reply
Old Dec 10, 2007 | 01:55 PM
  #666  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
please resort to previous post for guidance and input
Reply
Old Dec 10, 2007 | 02:00 PM
  #667  
dly's Avatar
dly
Legacy TMS Member
 
Joined: June 24, 2006
Posts: 2,501
Likes: 16
Yikkkes Tom post was #666 I knew he was the Devil
Reply
Old Dec 10, 2007 | 02:18 PM
  #668  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
funny how life turns out
Reply
Old Dec 10, 2007 | 04:06 PM
  #669  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Yo....... anyone out here? I'm sitting in Dallas hoping to make it back to Fort Wayne tonight. Bored out of my mind.......
Reply
Old Dec 10, 2007 | 04:25 PM
  #670  
dly's Avatar
dly
Legacy TMS Member
 
Joined: June 24, 2006
Posts: 2,501
Likes: 16
Originally Posted by tom281
Yo....... anyone out here? I'm sitting in Dallas hoping to make it back to Fort Wayne tonight. Bored out of my mind.......

Not a snow ***** chance in hell tonight . A bad Ice strom is just about to hit this area.
Reply
Old Dec 10, 2007 | 04:27 PM
  #671  
dly's Avatar
dly
Legacy TMS Member
 
Joined: June 24, 2006
Posts: 2,501
Likes: 16
Tonight: A chance of snow and sleet between 9pm and 1am, then snow, freezing rain and sleet likely. Cloudy, with a low around 26. East wind around 5 mph becoming south. Chance of precipitation is 60%. Total nighttime ice accumulation of less than a 0.1 of an inch possible. Total nighttime snow and sleet accumulation of less than a half inch possible.

Tuesday: Periods of freezing rain possibly mixed with sleet, mixing with rain after 1pm. High near 34. North wind between 5 and 10 mph. Chance of precipitation is 100%. New ice accumulation of 0.1 to 0.3 of an inch possible. New sleet accumulation of less than a half inch possible.

Tuesday Night: Occasional rain, snow, and freezing rain before 1am, then a chance of snow. Low around 27. North wind around 10 mph. Chance of precipitation is 80%. Little or no ice accumulation expected. New snow accumulation of less than one inch possible.


Sorry man
Reply
Old Dec 10, 2007 | 04:34 PM
  #672  
70MACH1OWNER's Avatar
Legacy TMS Member
 
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Well guys....I AM SPYDERIZED!!! I don't care if you are a young gun or an old fart like me but that pinion nut is a b***H coming off and a b***H going back on. It just takes leverage I guess. An 18 inch breaker bar with a 24 inch pipe plus I pulled my truck in the garage so I could put my feet against the front wheel so I wouldn't slide. I'm sure I won't be able to move tomorrow but it is done. Time for a beer!!
Scott
Reply
Old Dec 10, 2007 | 04:37 PM
  #673  
dly's Avatar
dly
Legacy TMS Member
 
Joined: June 24, 2006
Posts: 2,501
Likes: 16
Alrighteee Go out and test that thing.


A round of Bengay for everybody


Congrats Chalk one up for the old folks


Reply
Old Dec 10, 2007 | 04:51 PM
  #674  
aircare84's Avatar
Cobra Member
 
Joined: October 1, 2006
Posts: 1,153
Likes: 5
From: Central OH
Congrats Scott!
Right tools are usually the answer. Get the nut retorqued OK?
Let us know how it drives,with all that effort required, it better give you a nice boost
Reply
Old Dec 10, 2007 | 04:52 PM
  #675  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Originally Posted by dly
Tonight: A chance of snow and sleet between 9pm and 1am, then snow, freezing rain and sleet likely. Cloudy, with a low around 26. East wind around 5 mph becoming south. Chance of precipitation is 60%. Total nighttime ice accumulation of less than a 0.1 of an inch possible. Total nighttime snow and sleet accumulation of less than a half inch possible.

Tuesday: Periods of freezing rain possibly mixed with sleet, mixing with rain after 1pm. High near 34. North wind between 5 and 10 mph. Chance of precipitation is 100%. New ice accumulation of 0.1 to 0.3 of an inch possible. New sleet accumulation of less than a half inch possible.

Tuesday Night: Occasional rain, snow, and freezing rain before 1am, then a chance of snow. Low around 27. North wind around 10 mph. Chance of precipitation is 80%. Little or no ice accumulation expected. New snow accumulation of less than one inch possible.


Sorry man
Thanks man........

Originally Posted by 70MACH1OWNER
Well guys....I AM SPYDERIZED!!! I don't care if you are a young gun or an old fart like me but that pinion nut is a b***H coming off and a b***H going back on. It just takes leverage I guess. An 18 inch breaker bar with a 24 inch pipe plus I pulled my truck in the garage so I could put my feet against the front wheel so I wouldn't slide. I'm sure I won't be able to move tomorrow but it is done. Time for a beer!!
Scott

The cart did it!
Reply
Old Dec 10, 2007 | 05:06 PM
  #676  
70MACH1OWNER's Avatar
Legacy TMS Member
 
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Originally Posted by aircare84
Congrats Scott!
Right tools are usually the answer. Get the nut retorqued OK?
Let us know how it drives,with all that effort required, it better give you a nice boost
Larry,
Yes I retorqued it to the max of 150 ft/lbs. That still seems light as much effort as it took to get it off. It has one of those nuts that is like out of round you know. Very hard to turn in either direction. Not sure what the loctite does. Doesn't seem like you need it.

Darrell,
No driving just yet. I have decided while the car is up in the air I might as well go ahead and do Earl's SS brake lines. I will just be carefull opening the packages and will wrap them so I can open them Xmas eve at the in-laws.

Tom,
The scooter wouldn't hold my fat butt so I had to get out my truck!!
Reply
Old Dec 10, 2007 | 05:10 PM
  #677  
tom281's Avatar
Thread Starter
Legacy TMS Member
 
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Ok in all seriousness, congrats!
Reply
Old Dec 10, 2007 | 07:08 PM
  #678  
aircare84's Avatar
Cobra Member
 
Joined: October 1, 2006
Posts: 1,153
Likes: 5
From: Central OH
Tom,
After visiting the Dallas/Ft Worth megapolis, aren't you glad you live in IN? Way too many people there for me.
Hope you make it back north soon!
Reply
Old Dec 10, 2007 | 07:09 PM
  #679  
aircare84's Avatar
Cobra Member
 
Joined: October 1, 2006
Posts: 1,153
Likes: 5
From: Central OH
Tom,
After visiting the Dallas/Ft Worth megapolis, aren't you glad you live in rural IN? Way too many people there for me.
Hope you make it back north soon!
Reply
Old Dec 10, 2007 | 07:19 PM
  #680  
aircare84's Avatar
Cobra Member
 
Joined: October 1, 2006
Posts: 1,153
Likes: 5
From: Central OH
Tom,
After visiting the Dallas/Ft Worth megapolis, aren't you glad you live in rural IN? Way too many people there for me. My company is based out of Addison, which is a suburb N of Dallas proper.Usually go there about once a year. Not my kinda place to live
Hope you make it back north soon!
Reply



All times are GMT -6. The time now is 03:34 AM.