Midwest TMS'ers General Communication Thread
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Actually I have been really busy at work this week so far and I have been painting the room that the computer is in at home and the computer is disconnected. Should get it all put back together tonight so I can pester you guys day and night.
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Hey! 70MACH1OWNER how are these working out for you ? I've been looking for your right up about them.....
...You need to get these tested for me !....
The Blaster 2 CoPs are available individually or as a complete set of eight.
...You need to get these tested for me !....MSD Ford Coil-on-Plug, 05-07 ,4.6L SOHC, set of eight (PN 82438)
Improved spark energy and voltage output
Patented winding design and materials
Direct bolt-in to factory connectors
There’s no denying the performance and popularity of the late model Ford Mustang. For owners looking to improve their Ford’s performance on the street or strip, MSD offers a variety of ignition upgrades to fire up your Mod Motor.
The improved spark energy and voltage of MSD’s Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology!
The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output.Together, this combines a coil that produces higher voltage and spark energy! The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.
Improved spark energy and voltage output
Patented winding design and materials
Direct bolt-in to factory connectors
There’s no denying the performance and popularity of the late model Ford Mustang. For owners looking to improve their Ford’s performance on the street or strip, MSD offers a variety of ignition upgrades to fire up your Mod Motor.
The improved spark energy and voltage of MSD’s Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology!
The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output.Together, this combines a coil that produces higher voltage and spark energy! The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.
The Blaster 2 CoPs are available individually or as a complete set of eight.
Hey my friend I am trying to hook us up on these!!! I can't believe with Tom's connections he doesn't have the inside poop on these!! :-)
Scott
http://forums.bradbarnett.net/showth...37#post5535637
Last edited by 70MACH1OWNER; Mar 25, 2008 at 04:01 PM.
Shelby GT500 Member
Joined: October 9, 2006
Posts: 2,757
Likes: 1
From: It's tough in the jungle !
Hey my friend I am trying to hook us up on these!!! I can't believe with Tom's connections he doesn't have the inside poop on these!! :-)
Scott
http://forums.bradbarnett.net/showth...37#post5535637
Scott
http://forums.bradbarnett.net/showth...37#post5535637
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Shelby GT500 Member
Joined: October 9, 2006
Posts: 2,757
Likes: 1
From: It's tough in the jungle !
Thats the problem ! If I was guaranteed 8 hp I'd have a set on now ! ..lol well maybe stacked in my garage ...lol !
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Hey STD....check out this post by Steve @ GMS. This tells me volumes about this potential mod. And it ain't good!!!
Post # 9http://forums.bradbarnett.net/showth...92#post5535792
Thread Starter
Legacy TMS Member
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Hey STD....check out this post by Steve @ GMS. This tells me volumes about this potential mod. And it ain't good!!! Post # 9
http://forums.bradbarnett.net/showth...92#post5535792
Post # 9http://forums.bradbarnett.net/showth...92#post5535792
Maybe, just maybe I'll try them on my car to see if they do anything with a blower but even at my power/boost level I don't expect much.
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
So what does that tell you? Are you forgetting that Brenspeed tests/runs EVERY product that they sell?
Uh, yeah good luck with that.....
Now you're putting 2 & 2 together.....
Maybe, just maybe I'll try them on my car to see if they do anything with a blower but even at my power/boost level I don't expect much.
Uh, yeah good luck with that.....
Now you're putting 2 & 2 together.....
Maybe, just maybe I'll try them on my car to see if they do anything with a blower but even at my power/boost level I don't expect much.
Don't take this the wrong way...but Brenspeed sells the MDS brand of these COPS but doesn't post anything about potential gains. That seems out of the box for them. Again not being pissy just making an observation.
Maybe they need to post a before and after dyno sheet???Scott
Thread Starter
Legacy TMS Member
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Don't take this the wrong way...but Brenspeed sells the MDS brand of these COPS but doesn't post anything about potential gains. That seems out of the box for them. Again not being pissy just making an observation. Maybe they need to post a before and after dyno sheet???
Scott
Maybe they need to post a before and after dyno sheet???Scott
How's bout we volunteer our cars for dyno testing! If they prove gains, we'll both buy them. That way there's testing done on both NA and FI setups.
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
[quote=tom281;5535818]I stand corrected Scott...... I guess they probably got enough people asking the same questions that you're asking that they finally decided to carry them.
How's bout we volunteer our cars for dyno testing! If they prove gains, we'll both buy them. That way there's testing done on both NA and FI setups.[/quote
You got the supercharged car and I have the N/A car...if they are up for the test to prove it one way or the other than I am in!!!! Since you are the official spoksman for Brenspeed. 
I will leave the negoiating to you!!! But you can count on me!!
Scott
How's bout we volunteer our cars for dyno testing! If they prove gains, we'll both buy them. That way there's testing done on both NA and FI setups.
[/quoteYou got the supercharged car and I have the N/A car...if they are up for the test to prove it one way or the other than I am in!!!!
Since you are the official spoksman for Brenspeed. I will leave the negoiating to you!!! But you can count on me!!Scott
Shelby GT500 Member
Joined: October 9, 2006
Posts: 2,757
Likes: 1
From: It's tough in the jungle !
[quote=70MACH1OWNER;5535827]
I personally think this would be a good test for the MSD cops, 1 modified and tweaked Saleen ! and 1 heavily modified N/A 4.6 3v both applications would in theory have the best chance on showing a gain one would think ? although I think both could benefit from a plug change too ! .....
I stand corrected Scott...... I guess they probably got enough people asking the same questions that you're asking that they finally decided to carry them.
How's bout we volunteer our cars for dyno testing! If they prove gains, we'll both buy them. That way there's testing done on both NA and FI setups.[/quote
You got the supercharged car and I have the N/A car...if they are up for the test to prove it one way or the other than I am in!!!! Since you are the official spoksman for Brenspeed. I will leave the negoiating to you!!! But you can count on me!!
Scott
How's bout we volunteer our cars for dyno testing! If they prove gains, we'll both buy them. That way there's testing done on both NA and FI setups.
[/quoteYou got the supercharged car and I have the N/A car...if they are up for the test to prove it one way or the other than I am in!!!!
Since you are the official spoksman for Brenspeed. I will leave the negoiating to you!!! But you can count on me!!Scott
Last edited by blkstang06; Mar 25, 2008 at 07:43 PM.
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Shelby GT500 Member
Joined: October 9, 2006
Posts: 2,757
Likes: 1
From: It's tough in the jungle !
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Hey Chris,
I started this thread a 1 1/2 weeks ago and it didn't get much input. So I didn't know how to interpet the lack of further discussion. Did you see this thread? We just need to throw out their ideas to keep it alive.
Scott
http://forums.bradbarnett.net/showthread.php?t=465399
Last edited by 70MACH1OWNER; Mar 26, 2008 at 09:21 AM.
Cobra R Member
Joined: October 10, 2004
Posts: 1,627
Likes: 1
From: Location: Indy
Oh - I didn't know about the link. I am hitting the Spring Fling regardless - and it seems like someone just needs to take ownership and be the keeper of the schedule. Hmmm... Now who would be the wise patriarch of the group? The one we all look up to for guidance, direction, and worldly knowledge? You know, "So let it be written, so let it be done."
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Oh - I didn't know about the link. I am hitting the Spring Fling regardless - and it seems like someone just needs to take ownership and be the keeper of the schedule. Hmmm... Now who would be the wise patriarch of the group? The one we all look up to for guidance, direction, and worldly knowledge? You know, "So let it be written, so let it be done."
Patriarch.....I think thats a nice way of calling me an "old fart".
So go to the "Stangstock 08" thread and post your comments "Young Grasshopper"