Bold Moves Mustang Club of Tulsa
4/6/07, 03:54 PM
#2121
There are only 2 quarter mile tracks in the state. Here and Thunder Valley in Noble, OK near Norman. All other tracks are 1/8 mile tracks and in my opinion not worth running.
4/6/07, 04:18 PM
#2122
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
That's what I thought. Let's open our own!
Hey... I got this from Rob in Mustang Ok. AKA "Oklacop".
Hey man, thought you might want to share some info with the Tulsa guys. We are having a Mustang show at Joe Cooper Ford in Yukon, Ok on June 2nd. Doug from Bamachips is bringing his dyno the day before and will be doing forced induction tunes, naturally aspirated tunes, and dyno runs right here at the show. We already have a lot of interest in this. Anyone wanting one of Doug's custom tunes could really benefit from this. If you know anyone who is serious about doing this let me know so I can pass it on to Doug. We already have a list going. Thanks.
Rob in Mustang, OK.
Hey... I got this from Rob in Mustang Ok. AKA "Oklacop".
Hey man, thought you might want to share some info with the Tulsa guys. We are having a Mustang show at Joe Cooper Ford in Yukon, Ok on June 2nd. Doug from Bamachips is bringing his dyno the day before and will be doing forced induction tunes, naturally aspirated tunes, and dyno runs right here at the show. We already have a lot of interest in this. Anyone wanting one of Doug's custom tunes could really benefit from this. If you know anyone who is serious about doing this let me know so I can pass it on to Doug. We already have a list going. Thanks.
Rob in Mustang, OK.
4/6/07, 04:47 PM
#2123
That's what I thought. Let's open our own!
Hey... I got this from Rob in Mustang Ok. AKA "Oklacop".
Hey man, thought you might want to share some info with the Tulsa guys. We are having a Mustang show at Joe Cooper Ford in Yukon, Ok on June 2nd. Doug from Bamachips is bringing his dyno the day before and will be doing forced induction tunes, naturally aspirated tunes, and dyno runs right here at the show. We already have a lot of interest in this. Anyone wanting one of Doug's custom tunes could really benefit from this. If you know anyone who is serious about doing this let me know so I can pass it on to Doug. We already have a list going. Thanks.
Rob in Mustang, OK.
Hey... I got this from Rob in Mustang Ok. AKA "Oklacop".
Hey man, thought you might want to share some info with the Tulsa guys. We are having a Mustang show at Joe Cooper Ford in Yukon, Ok on June 2nd. Doug from Bamachips is bringing his dyno the day before and will be doing forced induction tunes, naturally aspirated tunes, and dyno runs right here at the show. We already have a lot of interest in this. Anyone wanting one of Doug's custom tunes could really benefit from this. If you know anyone who is serious about doing this let me know so I can pass it on to Doug. We already have a list going. Thanks.
Rob in Mustang, OK.
SIGN ME UP!!! I would love to have Doug custom tune one of the canned tunes I have from him so it is running at its optimal level!! What do we need to do to get signed up Paul???
4/6/07, 04:58 PM
#2124
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Give me a $100 and I'll hook you up. Or... just contact Doug.
I'll also see what I can find out from OKCCOP.
I'll also see what I can find out from OKCCOP.
4/6/07, 05:08 PM
#2125
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
I just sent him a note asking him for details... price etc...
While we're waiting... I was over at Humble's site and found probably the best thread ever... 61 pages of nice booties... Goodness! I gotta go rub one out... http://www.humbleperformance.com/for...d.php?tid=5835
While we're waiting... I was over at Humble's site and found probably the best thread ever... 61 pages of nice booties... Goodness! I gotta go rub one out... http://www.humbleperformance.com/for...d.php?tid=5835
4/6/07, 05:27 PM
#2126
very nice!
4/6/07, 06:48 PM
#2127
Hardly any of the pics will load...I guess we have hit a new all time low for this thread huh?
4/6/07, 06:49 PM
#2128
i finally got a tracking number for my driveshaft. Should be here on Thursday. Spoke with Benji today and he said he could put it in on Thursday night.:-)
4/6/07, 06:54 PM
#2129
Spoke with Randy today. Here is the update:
Got a new shirt place. Will have a price on Monday. I sat him down and asked him what was the deal. I even used Bob's "You don't want to do anything for us because you are tired of seeing the same 4 guys, aren't you?" He said no. Said that this last month or so has been very busy and he has had no time to do the special stuff they want to do. New CS guy starts tomorrow morning. BH, Randy and the other co-owner are sitting down Monday to hash out the stuff they want to do for summer, i.e. shows, events, etc. Should have an schedule by Monday night they said. He said they fully want us and will get us what we want. Since Randy's time is opening up he can finally get down to business on all this stuff. Said the delays have only been due to lack of time and nothing else. Said he would still like to do the membership drive on the 14th.
Here's my take: We go on doing what we have been and if BHF does something then that is icing on the cake. We just won't wait around anymore for them to make any moves. We should move the membership drive to a different date. He has handed out flyers to the last several mustangs they have sold. I gave him some cards to hand out now too.
Got a new shirt place. Will have a price on Monday. I sat him down and asked him what was the deal. I even used Bob's "You don't want to do anything for us because you are tired of seeing the same 4 guys, aren't you?" He said no. Said that this last month or so has been very busy and he has had no time to do the special stuff they want to do. New CS guy starts tomorrow morning. BH, Randy and the other co-owner are sitting down Monday to hash out the stuff they want to do for summer, i.e. shows, events, etc. Should have an schedule by Monday night they said. He said they fully want us and will get us what we want. Since Randy's time is opening up he can finally get down to business on all this stuff. Said the delays have only been due to lack of time and nothing else. Said he would still like to do the membership drive on the 14th.
Here's my take: We go on doing what we have been and if BHF does something then that is icing on the cake. We just won't wait around anymore for them to make any moves. We should move the membership drive to a different date. He has handed out flyers to the last several mustangs they have sold. I gave him some cards to hand out now too.
4/6/07, 06:55 PM
#2130
He said there overall goal is to be like the Harley store on Saturdays and to have us come out for those types of events as well as go to shows and pay our entry fees so they can setup with our cars. This would be nice for the Mid America show since it is so expensive.
4/6/07, 07:25 PM
#2131
interesting
4/6/07, 07:27 PM
#2132
So what date are we going for on the drive if we go forward?
4/6/07, 07:42 PM
#2133
Speaking of the mid america show should we be getting info and preparing for this now? June will be here before we know it.
4/6/07, 07:49 PM
#2134
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Let the record reflect... "GOOD LORD!"
I have no further witnesses your honor....
4/6/07, 09:14 PM
#2135
BABY GOT BACK!
That's sure to result in a "hung" jury.......
That's sure to result in a "hung" jury.......
4/7/07, 12:01 PM
#2136
****!
4/7/07, 12:10 PM
#2137
****! is right.........
Ok so it seems that the drag gods are not happy with our club. We must sacrifice a virgin. Paul you're elected.
Ok so it seems that the drag gods are not happy with our club. We must sacrifice a virgin. Paul you're elected.
4/7/07, 01:37 PM
#2138
hey david do u have any sound clips of ur exhaust? i just not noticed u were runnin pypes h pipe with no cats..right? i would love to hear it
4/7/07, 01:40 PM
#2139
I don't have any sound clips. Sorry. I will say that it is freaking loud!
4/7/07, 01:53 PM
#2140
what made u decide to go with that set up