Thanksgiving ... my Son let me drive his car !
#21
V6 Member
Thread Starter
Join Date: November 15, 2004
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Grantsdale+November 26, 2004, 7:25 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Grantsdale @ November 26, 2004, 7:25 PM)</td></tr><tr><td id='QUOTE'><!--QuoteBegin-Retro GT@November 26, 2004, 9:24 PM
Back in the bubble for the Winter it goes.
Back in the bubble for the Winter it goes.
![Crying](https://themustangsource.com/forums/images/smilies/crying.gif)
Because I got such a rough time for covering it while parked inside.
![04](https://themustangsource.com/forums/images/smilies/04.gif)
But... you all were right, it is pretty dumb to cover it. It looks better too!
Wait til' I show you my Escort GT in its bubble.
![Lol](https://themustangsource.com/forums/images/smilies/lol.gif)
#23
Originally posted by Retro GT@November 25, 2004, 11:31 PM
A couple of comments on the car at high speeds. First, the hood seems to want to come up on the front outside edges. I'm going to look and see if sealing the hood or making up some type of underhood deflector to help keep the hood down.
A couple of comments on the car at high speeds. First, the hood seems to want to come up on the front outside edges. I'm going to look and see if sealing the hood or making up some type of underhood deflector to help keep the hood down.
You can check to see if your bumpers are set correctly by doing the following:
1. With your hood fully closed and latched, pull up on the two forward outer edges of the hood. You should feel very little movement and your hood outer edges should be flushed with the fenders.
2. If your outer edges move up and down when you pull on it, it probably means that the two center bumpers are set too high.
3. Turn the clockwise to move them down. Again they should not be in contact with the hood when it is closed.
4. Raise the two outer bumpers if required by turning them counter clockwise. Make sure the hood is still flush with the fenders.
Thread
Thread Starter
Forum
Replies
Last Post
ssjbuu
Repair and Service Help
6
8/28/15 08:55 AM