Members' Rides: 2005+
263-15882, 2.5" Magnaflow 05 Axle-Back 263-15882 $438.64 $438.64
555-3120, Cold Air Kit for 05 Mustang 555-3120 $259.95 $259.95
146-ST7140, Predator for Steeda Modified 05 Mustang GT 146-ST7140 $399.95 $399.95
555-3305, Underdrive Pulley System 555-3305 $249.95 $249.95
Sub Total $1,348.49
Ok I'me about to order this list, but one item in question is the Underdrive Pulley.My car has the shaker 1000 system and I am wondering if running the underdrive pulleys is going to affect my voltage?I do notice with stereo base pounding lights do dim slightly with each big base hit.Also with all the new sufisticated electronics the car has i am wondering that the drop in voltage might affect Fuel pump,Spark,and all the other things that need full power.When i was racing GrandNational,s I remember people having battery problems with underdrive pullies.
555-3120, Cold Air Kit for 05 Mustang 555-3120 $259.95 $259.95
146-ST7140, Predator for Steeda Modified 05 Mustang GT 146-ST7140 $399.95 $399.95
555-3305, Underdrive Pulley System 555-3305 $249.95 $249.95
Sub Total $1,348.49
Ok I'me about to order this list, but one item in question is the Underdrive Pulley.My car has the shaker 1000 system and I am wondering if running the underdrive pulleys is going to affect my voltage?I do notice with stereo base pounding lights do dim slightly with each big base hit.Also with all the new sufisticated electronics the car has i am wondering that the drop in voltage might affect Fuel pump,Spark,and all the other things that need full power.When i was racing GrandNational,s I remember people having battery problems with underdrive pullies.
Legacy TMS Member
Joined: December 8, 2004
Posts: 1,817
Likes: 4
Mach 1 Member
Joined: November 12, 2004
Posts: 747
Likes: 0
Thanks John for the nice compliments.
Dave, the yellow fog covers were purchased on Ebay from Christi5555 for around $24.00 including shipping. They are Clear Bra 3M light covers. They are made for the 05 fog lights and come complete with instructions. Would take you about 20 min to install, Ponygirl just installed a set of them on her Yellow GT. After installation they look like they were made on there.
As for the emblems, I purchased them from T-N-T Mustang Connection from David Turner the co-owner, very cool guy. The emblems are actual 1968 GT repros. They are metal and not plastic. David removed the metal mounting tabs from the back and installed 3M tape in its place prior to shipping. They look awsome. If you go to the Exterior Mod Page on this forum and look for "New GT emblems installed" I have the whole process of removing the factory emblems. Good luck.
Dave, the yellow fog covers were purchased on Ebay from Christi5555 for around $24.00 including shipping. They are Clear Bra 3M light covers. They are made for the 05 fog lights and come complete with instructions. Would take you about 20 min to install, Ponygirl just installed a set of them on her Yellow GT. After installation they look like they were made on there.
As for the emblems, I purchased them from T-N-T Mustang Connection from David Turner the co-owner, very cool guy. The emblems are actual 1968 GT repros. They are metal and not plastic. David removed the metal mounting tabs from the back and installed 3M tape in its place prior to shipping. They look awsome. If you go to the Exterior Mod Page on this forum and look for "New GT emblems installed" I have the whole process of removing the factory emblems. Good luck.
Legacy TMS Member
Joined: December 8, 2004
Posts: 1,817
Likes: 4
Originally posted by BEACHBOY@April 3, 2005, 9:50 PM
Thanks John for the nice compliments.
Dave, the yellow fog covers were purchased on Ebay from Christi5555 for around $24.00 including shipping. They are Clear Bra 3M light covers. They are made for the 05 fog lights and come complete with instructions. Would take you about 20 min to install, Ponygirl just installed a set of them on her Yellow GT. After installation they look like they were made on there.
As for the emblems, I purchased them from T-N-T Mustang Connection from David Turner the co-owner, very cool guy. The emblems are actual 1968 GT repros. They are metal and not plastic. David removed the metal mounting tabs from the back and installed 3M tape in its place prior to shipping. They look awsome. If you go to the Exterior Mod Page on this forum and look for "New GT emblems installed" I have the whole process of removing the factory emblems. Good luck.
Thanks John for the nice compliments.
Dave, the yellow fog covers were purchased on Ebay from Christi5555 for around $24.00 including shipping. They are Clear Bra 3M light covers. They are made for the 05 fog lights and come complete with instructions. Would take you about 20 min to install, Ponygirl just installed a set of them on her Yellow GT. After installation they look like they were made on there.
As for the emblems, I purchased them from T-N-T Mustang Connection from David Turner the co-owner, very cool guy. The emblems are actual 1968 GT repros. They are metal and not plastic. David removed the metal mounting tabs from the back and installed 3M tape in its place prior to shipping. They look awsome. If you go to the Exterior Mod Page on this forum and look for "New GT emblems installed" I have the whole process of removing the factory emblems. Good luck.
Just looked for the covers on ebay, nothing, did all kinds of searches. Do you have any other contact where i could purchase these, thanks
V6 Member
Joined: November 14, 2004
Posts: 53
Likes: 0
Originally posted by Dan Kurdziel@March 31, 2005, 3:32 PM
Here are some pictures after my car was pampered by a Zaino treatment!! I got the car in Oct, now it's 5 months later and I still like it and think it looks great! Unfortunately, the sun wasn't out when I took these today. This Sat, I get the windows tinted and I'll submit more pictures after that.
Here are some pictures after my car was pampered by a Zaino treatment!! I got the car in Oct, now it's 5 months later and I still like it and think it looks great! Unfortunately, the sun wasn't out when I took these today. This Sat, I get the windows tinted and I'll submit more pictures after that.
I have added pictures after the window tinting and another coat of wax. Also, if you notice, I have added a shorter atenna.
Member
Joined: March 26, 2005
Posts: 26
Likes: 0
[attachmentid=16769][attachmentid=16770][attachmentid=16771]undefined
Here are some pics of my 05 Quicksilver GT. It is a satin silver premium Gt with a 5-speed and some upgrades: STEEDA high velocity cold air kit, JET chip, SLP "Loudmouth axleback with x-pipe. I am looking to put on the new BBK 62mm throttle body in the near future. 
Originally posted by TheMustangSource@September 25, 2004, 9:41 PM
Ladies and gentlemen, the time is near! This thread is for photos of your '05s!
Ladies and gentlemen, the time is near! This thread is for photos of your '05s!
Member
Joined: March 5, 2005
Posts: 30
Likes: 0
Ordered 12/31/04
Delivered 3/30/05
Error Message:
The total filespace required to upload all the attached files is greater than your per post or global limit. Please reduce the number of attachments or the size of the attachments.
Delivered 3/30/05
Error Message:
The total filespace required to upload all the attached files is greater than your per post or global limit. Please reduce the number of attachments or the size of the attachments.
GT Member
Joined: January 18, 2005
Posts: 153
Likes: 0
Woo hoo! Finally get to put my Mustang on here. Heres my baby. 
Since I cant seem to post the photos for some reason, this link goes to my website. My Webpage
Since I cant seem to post the photos for some reason, this link goes to my website. My Webpage
Guys.Hear me out.I would never run the underdrive pullies do to the folowing reasons.Back in 93 i was dragracing weekly with my 87 Buick GrandNational.I got down to 11.5 at 117mph with 1.55 60 ft,s with out running underdrive pullies wich my buddies with the same cars were saying put them on.Well soon after ,they started having isues with them.Batteries dying or cranking slow, detonation in engine do to voltage drop.Also, forget a good stereo.Your chassing small gains with a chance of problems in my eyes.Especialy now with all the electronics,shaker 1000,High voltage coils.look elsewhere for HP gains.Also I noticed, we are paying ridiculous prices for our go fast parts.
People used to upgrade to MSD ignition on there rides for beeter spark quality.What do you think happens to spark performance when you slow down the alternator? 
Interior photo