Livernois Shelby GT1000R Video/Pics
Thread Starter
Member
Joined: June 16, 2010
Posts: 47
Likes: 0
Livernois Shelby GT1000R Video/Pics
After seeing the GT800R we built for a customer in Massachusetts, we had a customer approach us about building a GT1000R. It has a very long list of mods, and would probably be easier to say what wasn't modified, but it is powered by a Livernois built big bore GT wet sump aluminum block, CNC heads, GT supercar cams, and a 4.0L Whipple.
The GT800 made 862 RWHP / 798 RWTQ and has been a best of 9.70 @ 148 mph at a weight of 4,090 lbs.
The "GT1000R", a 2009 GT500, made 1006 RWHP / 916 RWTQ on the dyno a few days ago. The dyno sheet can be seen below... over 800 RWTQ at 2,600 rpms!
GT1000R Dyno Video
Here are some photos of the car. The font on the side is incorrect, so that will be re-done soon.
Regards,
Rick LeBlanc
Livernois Motorsports
The GT800 made 862 RWHP / 798 RWTQ and has been a best of 9.70 @ 148 mph at a weight of 4,090 lbs.
The "GT1000R", a 2009 GT500, made 1006 RWHP / 916 RWTQ on the dyno a few days ago. The dyno sheet can be seen below... over 800 RWTQ at 2,600 rpms!
GT1000R Dyno Video
Here are some photos of the car. The font on the side is incorrect, so that will be re-done soon.
Regards,
Rick LeBlanc
Livernois Motorsports
Cobra R Member
Joined: September 11, 2009
Posts: 1,776
Likes: 0
Ridic!! Props on the build guys.
Reminds me of the Ultimate Bad Boy (UBB) 'stang.
Her reaction to driving something of similar power tells you everything.
Reminds me of the Ultimate Bad Boy (UBB) 'stang.
Her reaction to driving something of similar power tells you everything.
Last edited by 2010MustangGT; Aug 21, 2010 at 12:40 AM. Reason: youtube
Member
Joined: September 23, 2009
Posts: 30
Likes: 0
From: Huntsville, AL
Sometimes when you see these fully built cars the engine bay looks like utter ****. That one on the other hand could (almost, we know better) pass for bone stock. Serious points for that in my book.
Bullitt Member
Joined: May 3, 2010
Posts: 430
Likes: 0
From: So Cal
After seeing the GT800R we built for a customer in Massachusetts, we had a customer approach us about building a GT1000R. It has a very long list of mods, and would probably be easier to say what wasn't modified, but it is powered by a Livernois built big bore GT wet sump aluminum block, CNC heads, GT supercar cams, and a 4.0L Whipple.
The GT800 made 862 RWHP / 798 RWTQ and has been a best of 9.70 @ 148 mph at a weight of 4,090 lbs.
The "GT1000R", a 2009 GT500, made 1006 RWHP / 916 RWTQ on the dyno a few days ago. The dyno sheet can be seen below... over 800 RWTQ at 2,600 rpms!
GT1000R Dyno Video
Here are some photos of the car. The font on the side is incorrect, so that will be re-done soon.
Regards,
Rick LeBlanc
Livernois Motorsports
The GT800 made 862 RWHP / 798 RWTQ and has been a best of 9.70 @ 148 mph at a weight of 4,090 lbs.
The "GT1000R", a 2009 GT500, made 1006 RWHP / 916 RWTQ on the dyno a few days ago. The dyno sheet can be seen below... over 800 RWTQ at 2,600 rpms!
GT1000R Dyno Video
Here are some photos of the car. The font on the side is incorrect, so that will be re-done soon.
Regards,
Rick LeBlanc
Livernois Motorsports
Thread Starter
Member
Joined: June 16, 2010
Posts: 47
Likes: 0
Nitto NT555R Drag Radial (305/35/20)
QA1 Adjustable Shocks
QA1 Adjustable Struts w/ Coilovers
BMR Rear Springs
BMR Adjustable Upper & Lower Control Arms
BMR Adjustable Panhard Bar & Brace
BMR Swaybar Relocation Kit
BMR Subframe Connectors
-Rick
QA1 Adjustable Shocks
QA1 Adjustable Struts w/ Coilovers
BMR Rear Springs
BMR Adjustable Upper & Lower Control Arms
BMR Adjustable Panhard Bar & Brace
BMR Swaybar Relocation Kit
BMR Subframe Connectors
-Rick
Thread
Thread Starter
Forum
Replies
Last Post
austin101385
'10-14 Shelby Mustangs
3
Oct 2, 2015 01:00 PM
DerekShiekhi
GT350
1
Sep 29, 2015 04:35 AM