Help me align my exhaust tips
#21
Legacy TMS Member
Thread Starter
If you look carefully at how I bent the hangers, you will see that the amount of adjustment required can't be accomodated through simple adjustment of the pipes on my car. I'm going to wait and see if the shims will cause any problems. They don't seem to cause any more leakage than if I left the shims out. I also managed to get both tips even in terms of depth. They're practically flush with the cut-outs so you can see a lot of steam buildup on the bumpers when it is cold outside.
Here's a new video I made of a cold start and some engine revving. It actually backfired each time I let off the throttle, but the microphone on the Canon 570 couldn't pick up the low frequency sounds:
http://youtube.com/watch?v=jAAbOZzEUKU
Here's a new video I made of a cold start and some engine revving. It actually backfired each time I let off the throttle, but the microphone on the Canon 570 couldn't pick up the low frequency sounds:
http://youtube.com/watch?v=jAAbOZzEUKU
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM
tj@steeda
2015 - 2023 MUSTANG
0
9/10/15 12:44 PM
robjh22
Suspension, Brakes, and Tire Tech
4
9/8/15 12:31 PM